Pierre Finkelstein and fauxbrushes.com have collections for all techniques of decorative painting or faux finishing. We put together collections such as woodgraining, faux marble, trompe l’oeil, ornamentation, sign painting, glazing, gilding, stenciling, plaster, faux finishing and textured finishes.
We have natural and synthetic brushes made with Bristle, Nylon, Squirrel, Sable, Bluetop, Ox, Polytop, Badger, and black bristle. We have a wide array of hand-tied brushes, paints, glazes, books, and decorative painting accessories. Faux Brushes was started by Pierre Finkelstein, author of The Art of Faux who teaches decorative painting techniques at Pierre Finkelstein Institute of Decorative Painting, Inc.
4 products
Graining Flogger (Black Bristle) | WD-04
ITEM #: WD-04_Size-60
PRICE: $31.32 Regular price Regularly: $39.15 Sale price Save $7.83Our flogger is made with extra long, hand-selected black bristle hair. The handle is also extra long for ultimate control. The flogger brush mimicks marks resembling wood pores which makes it an essential tool in the faux woodgrainer's kit. Great for faux mahogany, walnut, cherry, teak, and many more faux bois, woodgraining decorative painting.
- Selected black bristle hair
- Used in negative brushwork
- Whipping motion with a dry brush displaces glaze
- Available in 4 sizes: 60, 80, 100, 120
- Size 80 is the standard size
SIZE TRANSLATIONS
SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
60 | 13.4" / 34cm | 0.2" / 7mm | 2.4" / 60mm |
4.9" / 125mm |
80 | 13.6" / 34.5cm | 0.2" / 7mm | 3.1" / 80mm | 4.9" / 125mm |
100 | 14.2" / 36cm | 0.2" / 7mm | 3.9" / 100mm | 4.9" / 125mm |
120 | 12" / 30.5cm | 0.2" / 7mm | 4.7" / 120mm | 4.9" / 125mm |
BRUSH SPECIFICATIONS
HAIR TYPE |
Black Bristle |
BRUSH HOLD |
Drummer's Hold |
USAGE |
Background Woodgraining; pores |
MEDIUM |
Water/Oil |
FERRULE |
Copper |
HANDLE |
Wooden, Flat, Long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
Oil Medium | Water Medium | |
---|---|---|
Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
4-in-1 Flat Spalter Brush (Bristle) | GLZ-09
ITEM #: GLZ-09
PRICE: $33.72 Regular price Regularly: $42.15 Sale price Save $8.43Our long haired spalter is a combination of a spalter, softener, and a mini-flogger. This natural bristle brush becomes economical because of it's versatility. Our spalters are over 1/3" thick. From strie to corner stippling, smoothing to moire, this brush does it all. Keep it in your back pocket and it will get used often.
- Hand-selected bristle hair, longer than a Spalter
- Brush 'springs' into action (learn more)
- Softens unwanted brush/roller marks
- 4 uses: softening, strie, stipple, & moire
- A versatile brush for the price
- Water: Wash with soap, Oil: Thinned & wash w/ soap
SIZE TRANSLATIONS
SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
100 | 8.9" / 22.7cm | .16" / 4mm | 4" / 100mm | 2.2" / 55mm |
BRUSH SPECIFICATIONS
HAIR TYPE |
Natural Bristle |
BRUSH HOLD |
Drummer's Hold, Conductor's Hold |
USAGE |
Corner stippling; strie |
MEDIUM |
Water or Oil |
FERRULE |
Copper |
HANDLE |
Wooden flat short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
Oil Medium | Water Medium | |
---|---|---|
Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Codtail Blending Brush (Bristle) | GLZ-12
ITEM #: GLZ-12_Size-50
PRICE: $24.00 Regular price Regularly: $30.00 Sale price Save $6.00Our long handle small codtail is the ultimate smoothing tool. It can be gentle as a smoother or used aggressively to efficiently blend/break up multi-tonal glazes. We also love it as a fine stippler on all hard to reach areas.
- Long hair for a finer blending
- 1/3 inch thick, high quality bristle keeps it's shape
- Can be used in water/oil when dedicated (learn more)
- See Oil Softener for ultimate oil softener
- Wonderful for stippling corners, relief's, & heavy textures
- Great for reaching intricate surfaces like mullions, dentils & window casing, etc.
- Use as a mini-flogger (WD-4)
- Essential for blending clouds
- Water: Wash with soap, Oil: Thinned & wash w/ soap
SIZE TRANSLATIONS
SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
50 | 11.8" / 30cm |
0.1" / 4.5mm |
2" / 50mm | 3.3" / 84mm |
60 | 11.9" / 30.2cm | 0.3" / 8mm | 2.4" / 60mm | 3.4" / 86mm |
BRUSH SPECIFICATIONS
HAIR TYPE |
Natural Bristle |
BRUSH HOLD |
Conductor's Hold, Pencil Hold |
USAGE |
Softening; breaking up the glaze |
MEDIUM |
Water or Oil |
FERRULE |
Copper |
HANDLE |
Wooden flat long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
Oil Medium | Water Medium | |
---|---|---|
Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Codtail Stippling Brush (Bristle) | GLZ-13
ITEM #: GLZ-13
PRICE: $38.84 Regular price Regularly: $48.55 Sale price Save $9.71Our codtail is the ultimate smoothing tool. It can be gentle as a smoother or used aggressively to efficiently blend/break up multi-tonal glazes. 'Crush' it on the surface to create a very broken-up effect. We also love it as a fine stippler on all hard to reach areas.
- Select, long hair for a finer blending
- 1/3 inch thick, high quality bristle keeps it's shape
- Can be used in water/oil when dedicated (learn more)
- See Oil Softener for ultimate oil softener
- Can be used as a flogger in oil
- Excellent for softening crown molding and baseboards
- Perfect for faux leather, color washes, & clouds
- Water: Wash with soap, Oil: Thinned & wash w/ soap
SIZE TRANSLATIONS
SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
120 | 11" / 28cm | 0.2" / 5mm | 4.7" / 120mm | 4.2" / 106mm |
BRUSH SPECIFICATIONS
HAIR TYPE |
Natural Bristle |
BRUSH HOLD |
Conductor's Hold, Pencil Hold |
USAGE |
Softening; breaking up the glaze |
MEDIUM |
Water or Oil |
FERRULE |
Copper |
HANDLE |
Wooden flat long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
Oil Medium | Water Medium | |
---|---|---|
Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |