35 products
35 products
Deerhoof Liner Striper Brush (Skunk) | TL-31
ITEM #: TL-31_Size-02
PRICE: $18.45 Regular price/
Only 8 items in stock!
The deerhoof and the Rondin are the ultimate striping brushes- no taping needed! A deerhoof is designed for striping color or size, much like the rondin brush. The deerhoof shape offers a distinct slant, which allows for optimum surface contact. The deerhoof is best for applying size or color to flat or curved surfaces. In order to make this brush so dense, its ferrule is constructed by hand, with quill and wire. By pinching the brush at the heal, long and exact stripes can be achieved.
A must-have for gilders
Can be used in oil/water when dedicated
Most comparable with the Rondin brush
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
FERRULE LENGTH
HAIR LENGTH
2
6.9" / 17.4cm
4
7" / 17.9cm
6
8
7.3" / 18.6cm
10
7.4" / 18.8cm
BRUSH SPECIFICATIONS
HAIR TYPE
Skunk
BRUSH HOLD
Choked Pen Hold
USAGE
Painting freehand stripes or applying size
MEDIUM
Water or Oil
FERRULE
Wire-tied quill
HANDLE
Wooden round short
The deerhoof and the Rondin are the ultimate striping brushes- no taping needed! A deerhoof is designed for striping color or size, much like the rondin brush. The deerhoof shape offers a distinct slant, which allows for optimum surface contact. The deerhoof is best for applying size or color to flat or curved surfaces. In order to make this brush so dense, its ferrule is constructed by hand, with quill and wire. By pinching the brush at the heal, long and exact stripes can be achieved.
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 2 | 6.9" / 17.4cm | |||
| 4 | 7" / 17.9cm | |||
| 6 | ||||
| 8 | 7.3" / 18.6cm | |||
| 10 |
7.4" / 18.8cm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Skunk |
|
BRUSH HOLD |
Choked Pen Hold |
|
USAGE |
Painting freehand stripes or applying size |
|
MEDIUM |
Water or Oil |
|
FERRULE |
Wire-tied quill |
|
HANDLE |
Wooden round short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Lettering Brush (Samina Nylon) | TL-03
ITEM #: TL-03_Size-06
PRICE: $10.40 Regular price/
Only 17 items in stock!
This flat-tip, samina lettering brush has proved to be the softest hair that still 'springs ' into action, for water mediums. With it's square tip, start/stop each letter/line with a traditional right angle. Using your pinkie as a guide, create controlled 'thin-thick-thin' strokes, evenly with our lettering brush. Available in 6 sizes.
Long, flat top samina synthetic fiber
Short handle for control
Shaped for ultimate medium dispersion (learn more)
Also excellent for scrolling & circular ornamentation
Perfect for delicate areas in trompe l'oeil techniques
Superb for outlining
Samina synthetic, flat tip
Brush Care: Wash with soap
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
FERRULE LENGTH
HAIR LENGTH
6
7.6" / 19.2cm
8
7.7" / 19.6cm
12
7.9" / 20cm
14
8.1" / 20.6cm
16
8.3" / 21.2cm
BRUSH SPECIFICATIONS
HAIR TYPE
Samina Nylon
BRUSH HOLD
Conductor's Hold, Pencil Hold
USAGE
Lettering; outlining; ornamentation
MEDIUM
Water
FERRULE
Tin
HANDLE
Wooden round short
This flat-tip, samina lettering brush has proved to be the softest hair that still 'springs ' into action, for water mediums. With it's square tip, start/stop each letter/line with a traditional right angle. Using your pinkie as a guide, create controlled 'thin-thick-thin' strokes, evenly with our lettering brush. Available in 6 sizes.
- Long, flat top samina synthetic fiber
- Short handle for control
- Shaped for ultimate medium dispersion (learn more)
- Also excellent for scrolling & circular ornamentation
- Perfect for delicate areas in trompe l'oeil techniques
- Superb for outlining
- Samina synthetic, flat tip
- Brush Care: Wash with soap
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
|
6 |
7.6" / 19.2cm | |||
|
8 |
7.7" / 19.6cm | |||
|
12 |
7.9" / 20cm | |||
|
14 |
8.1" / 20.6cm | |||
|
16 |
8.3" / 21.2cm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Samina Nylon |
|
BRUSH HOLD |
Conductor's Hold, Pencil Hold |
|
USAGE |
Lettering; outlining; ornamentation |
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Alpha 6 Alphakrylik™ Acrylic Paint 2.5 - 5 oz. Bottles
ITEM #: PAL-01a_BCAR_2oz
PRICE: $8.95 Regular price/
Only 1 items in stock!
For 8 oz. bottles Click Here
For 16- 32 oz. bottles Click Here
For Gallon Size Cans Click Here
For Electroshock Colors Click Here
For Metallic Colors Click Here
Alpha6 Alphakrylik™ is a versatile paint for artists of many mediums.
It is a water based acrylic paint that cleans up with soap and water. It has super intense pigment, and durability.
Alphakrylik™ can be used by fine artists who paint on canvas, window splash artists who paint on windows, garment and shoe artists, as well as sign painters. It is truly a professional artist's paint but due to the easy clean up, can be used by anyone.
Alphakrylik™ lasts for years on windows, signs and canvas. This water based paint dries matte. It can however, be clear coated to create a glossy finish.
Click for SDS sheet
For 8 oz. bottles Click Here
For 16- 32 oz. bottles Click Here
For Gallon Size Cans Click Here
For Electroshock Colors Click Here
For Metallic Colors Click Here
Alpha6 Alphakrylik™ is a versatile paint for artists of many mediums.
It is a water based acrylic paint that cleans up with soap and water. It has super intense pigment, and durability.
Alphakrylik™ can be used by fine artists who paint on canvas, window splash artists who paint on windows, garment and shoe artists, as well as sign painters. It is truly a professional artist's paint but due to the easy clean up, can be used by anyone.
Alphakrylik™ lasts for years on windows, signs and canvas. This water based paint dries matte. It can however, be clear coated to create a glossy finish.
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Striping Edge (Wood) | TTL-30
ITEM #: TTL-30_BA_26
PRICE: $29.00 Regular price/
Only 1 items in stock!
Wooden striping edge, beveled on two sides. The striping edge is the answer to realistic faux molding! Control each stroke with our handmade striping edge made of lightweight bass or pine wood and rubbed in oil for protection. Its double-reversed, beveled edge allows for consistent and efficient linear trompe l'oeil effects like faux molding.
Available in 26"/28" and 36"
Material: Bass Wood and Maple Wood
Bass Wood: Lightweight, durable, and flexible. Great for Beginners!
Maple Wood: Pierre's choice for Professionals!
Striping brushes effortlessly slide across edge, keeping an even pressure
Natural bow of wood adds spring which helps keep it in place
Wooden striping edge, beveled on two sides. The striping edge is the answer to realistic faux molding! Control each stroke with our handmade striping edge made of lightweight bass or pine wood and rubbed in oil for protection. Its double-reversed, beveled edge allows for consistent and efficient linear trompe l'oeil effects like faux molding.
- Available in 26"/28" and 36"
- Material: Bass Wood and Maple Wood
- Bass Wood: Lightweight, durable, and flexible. Great for Beginners!
- Maple Wood: Pierre's choice for Professionals!
- Striping brushes effortlessly slide across edge, keeping an even pressure
- Natural bow of wood adds spring which helps keep it in place
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Long Liner Brush (Samina Nylon) | TL-15
ITEM #: TL-15_Size-04
PRICE: $11.55 Regular price/
Only 61 items in stock!
This brush is indispensable for all your ornamentation work. This lining brush is made with soft samina hair and has exceptional performance for fine veined and breche marble. Samina fiber is meant to simulate squirrel hair, but with the capability to transport all of today's water mediums. Available in 4 sizes.
Long, synthetic, samina hair
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Small sizes wonderful for sharp, fine veins and fissures
Use as a liner for ornamentation
Larger sizes perfect for Portor Breche and other breche marbles
Description: Soft synthetic, tapered point
Brush Care: Water: Wash with soap
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
FERRULE LENGTH
HAIR LENGTH
2
12" / 30.5cm
" / mm
" / mm
" / mm
4
12.4" / 31.5cm
" / mm
" / mm
" / mm
6
12.4" / 30.6cm
" / mm
" / mm
" / mm
8
12" / 30.5cm
BRUSH SPECIFICATIONS
HAIR TYPE
Samina
BRUSH HOLD
Conductor's Hold, Pencil Hold
USAGE
Fine veining for faux marble in water mediums; fissures
MEDIUM
Water
FERRULE
Tin
HANDLE
Wooden round long
This brush is indispensable for all your ornamentation work. This lining brush is made with soft samina hair and has exceptional performance for fine veined and breche marble. Samina fiber is meant to simulate squirrel hair, but with the capability to transport all of today's water mediums. Available in 4 sizes.
- Long, synthetic, samina hair
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Small sizes wonderful for sharp, fine veins and fissures
- Use as a liner for ornamentation
- Larger sizes perfect for Portor Breche and other breche marbles
- Description: Soft synthetic, tapered point
- Brush Care: Water: Wash with soap
SIZE TRANSLATIONS
|
SIZE
|
BRUSH LENGTH
|
FERRULE WIDTH
|
FERRULE LENGTH
|
HAIR LENGTH
|
|
2
|
12" / 30.5cm |
" / mm
|
" / mm
|
" / mm
|
|
4
|
12.4" / 31.5cm |
" / mm
|
" / mm
|
" / mm
|
|
6
|
12.4" / 30.6cm |
" / mm
|
" / mm
|
" / mm
|
|
8
|
12" / 30.5cm |
|
|
|
BRUSH SPECIFICATIONS
|
HAIR TYPE
|
Samina
|
|
BRUSH HOLD
|
Conductor's Hold, Pencil Hold
|
|
USAGE
|
Fine veining for faux marble in water mediums; fissures
|
|
MEDIUM
|
Water
|
|
FERRULE
|
Tin
|
|
HANDLE
|
Wooden round long
|
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Chunking Filbert Brush (Bristle) | TL-20
ITEM #: TL-20_Size-04
PRICE: $10.40 Regular price/
Only 22 items in stock!
It's back! We've decided to bring back the premier striping brush for oil finishes. Don't be fooled by it's simple appearance, three types of bristle are carefully combined to create this perfect filbert shape. Don't settle for lesser quality. Buy the brush that allows you to paint your best. In every project in oil, this filbert will become indespensible. Use effectively with a Striping Edge for faux molding and other linear projects. Available in 3 sizes.
White Bristle hair, for murals or oil striping
Hair Length: .8 in to 1.2 in
Dia./width: .4 in to .6 in
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
FERRULE LENGTH
HAIR LENGTH
4
12.4" / 31.5cm
" / mm
" / mm
" / mm
6
12.9" / 32.7cm
" / mm
" / mm
" / mm
8
12.3" / 33.7cm
" / mm
" / mm
" / mm
BRUSH SPECIFICATIONS
HAIR TYPE
Bristle
BRUSH HOLD
Pencil Hold
USAGE
Trompe l'oeil, striping
MEDIUM
Oil or Water
FERRULE
Tin
HANDLE
Wooden round long
It's back! We've decided to bring back the premier striping brush for oil finishes. Don't be fooled by it's simple appearance, three types of bristle are carefully combined to create this perfect filbert shape. Don't settle for lesser quality. Buy the brush that allows you to paint your best. In every project in oil, this filbert will become indespensible. Use effectively with a Striping Edge for faux molding and other linear projects. Available in 3 sizes.
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
|
4 |
12.4" / 31.5cm |
" / mm |
" / mm |
" / mm |
|
6 |
12.9" / 32.7cm |
" / mm |
" / mm |
" / mm |
|
8 |
12.3" / 33.7cm |
" / mm |
" / mm |
" / mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Bristle |
|
BRUSH HOLD |
Pencil Hold |
|
USAGE |
Trompe l'oeil, striping |
|
MEDIUM |
Oil or Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Golden Artist Colors SoFlat Matte Acrylic Paint
ITEM #: PSF-01_PY_4oz
PRICE: $16.39 Regular price Sale price/
Only 3 items in stock!
GOLDEN has developed a paint that helps artists create immersive fields of color without the distraction of texture and glare. The paint has a flowing consistency, offering exceptional coverage and a leveling capability as it dries. This unique combination of qualities can only be found in SoFlat Matte Acrylic Colors.Artists have used gouache for centuries because of its matteness and opacity, but are restricted by its inherently sensitive paint film. SoFlat moves beyond these limitations, providing a velvety smooth, durable surface. The advantages of SoFlat are extended by its compatibility with other acrylic paints and mediums, increasing the range of creative effects that can be achieved.Perhaps the most important quality of SoFlat is quality itself. Because it is produced using the same professional standards as all GOLDEN Acrylics, and is backed by our unrivaled service and support, you can depend on the performance and consistency of these professional artist colors.OPACITY AND COVERAGEWhen striving for that pure color effect, you need a paint that goes down evenly with full intensity in as few coats as possible. While some pigments are naturally transparent, SoFlat has a unique formulation that provides greater opacity from these colors than is normally found in acrylic paints.LEVELINGPerhaps the most distinctive quality, and the one that might be most unique to SoFlat, is the paints natural leveling quality. The paint relaxes after being brushed out, making it easier to minimize the appearance of brushstrokes for uninterrupted fields of rich matte color.MATTEArtists have always been drawn to the enigmatic quality of matte color, and SoFlat delivers with a glare-free surface that allows the depth and intensity of each color take center stage.
Click for SDS sheet
GOLDEN has developed a paint that helps artists create immersive fields of color without the distraction of texture and glare. The paint has a flowing consistency, offering exceptional coverage and a leveling capability as it dries. This unique combination of qualities can only be found in SoFlat Matte Acrylic Colors.
Artists have used gouache for centuries because of its matteness and opacity, but are restricted by its inherently sensitive paint film. SoFlat moves beyond these limitations, providing a velvety smooth, durable surface. The advantages of SoFlat are extended by its compatibility with other acrylic paints and mediums, increasing the range of creative effects that can be achieved.
Perhaps the most important quality of SoFlat is quality itself. Because it is produced using the same professional standards as all GOLDEN Acrylics, and is backed by our unrivaled service and support, you can depend on the performance and consistency of these professional artist colors.
OPACITY AND COVERAGE
When striving for that pure color effect, you need a paint that goes down evenly with full intensity in as few coats as possible. While some pigments are naturally transparent, SoFlat has a unique formulation that provides greater opacity from these colors than is normally found in acrylic paints.
LEVELING
Perhaps the most distinctive quality, and the one that might be most unique to SoFlat, is the paints natural leveling quality. The paint relaxes after being brushed out, making it easier to minimize the appearance of brushstrokes for uninterrupted fields of rich matte color.
MATTE
Artists have always been drawn to the enigmatic quality of matte color, and SoFlat delivers with a glare-free surface that allows the depth and intensity of each color take center stage.
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Pointed Fine Detail Brush (Sable) | TL-04
ITEM #: TL-04_Size-02
PRICE: $15.00 Regular price/
Only 102 items in stock!
My best brush for all freehand detail work! Quality, short pointed sable hair is hand-selected for this detail brush. It's amazingly pointed to make it easy to render magic for all freehand detail painting. For any mural or ornamentation project, use our short, pointed, sable detail brush for accuracy and best response. Using your pinkie as a guide, create controlled, 'thin-thick-thin' strokes, evenly with this brush. Available in 3 sizes
Fine pointed sable hair
Sable hair ages well and is self-sharpening
Short handle for control
Rounded for ultimate medium dispersion (learn more)
Can be used in oil/water when dedicated (learn more)
Excellent for surgical touch-ups
Description: Soft hair, for precision painting
Preferred Medium: Oil/Water
Brush Ferrule/Handle: tin, wooden round short
Brush Hair Type: Sable
Brush Hold: Conductor's Hold, Pencil Hold
Brush Care: Water: Wash with soap, Oil: Thinned & lard
Hair Length: .6 to .8" (15-20mm)
Dia./width: .12" (3mm)
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
FERRULE LENGTH
HAIR LENGTH
2
7.2" / 18.2cm
" / mm
" / mm
" / mm
4
8" / 20.3cm
" / mm
" / mm
" / mm
6
8.1" / 20.5cm
" / mm
" / mm
" / mm
BRUSH SPECIFICATIONS
HAIR TYPE
Kolinsky Sable
BRUSH HOLD
Conductor's Hold, Pencil Hold
USAGE
Freehand trompe l'oeil & ornamentation
MEDIUM
Oil or Water
FERRULE
Tin
HANDLE
Wooden round short
My best brush for all freehand detail work! Quality, short pointed sable hair is hand-selected for this detail brush. It's amazingly pointed to make it easy to render magic for all freehand detail painting. For any mural or ornamentation project, use our short, pointed, sable detail brush for accuracy and best response. Using your pinkie as a guide, create controlled, 'thin-thick-thin' strokes, evenly with this brush. Available in 3 sizes
- Fine pointed sable hair
- Sable hair ages well and is self-sharpening
- Short handle for control
- Rounded for ultimate medium dispersion (learn more)
- Can be used in oil/water when dedicated (learn more)
- Excellent for surgical touch-ups
- Description: Soft hair, for precision painting
- Preferred Medium: Oil/Water
- Brush Ferrule/Handle: tin, wooden round short
- Brush Hair Type: Sable
- Brush Hold: Conductor's Hold, Pencil Hold
- Brush Care: Water: Wash with soap, Oil: Thinned & lard
- Hair Length: .6 to .8" (15-20mm)
- Dia./width: .12" (3mm)
SIZE TRANSLATIONS
|
SIZE
|
BRUSH LENGTH
|
FERRULE WIDTH
|
FERRULE LENGTH
|
HAIR LENGTH
|
|
2
|
7.2" / 18.2cm |
" / mm
|
" / mm
|
" / mm
|
|
4
|
8" / 20.3cm |
" / mm
|
" / mm
|
" / mm
|
|
6
|
8.1" / 20.5cm |
" / mm
|
" / mm
|
" / mm
|
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Kolinsky Sable |
|
BRUSH HOLD |
Conductor's Hold, Pencil Hold |
|
USAGE |
Freehand trompe l'oeil & ornamentation |
|
MEDIUM |
Oil or Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Pointed Detail Brush (Taklon Nylon) | TL-25
ITEM #: TL-25_Size-04
PRICE: $6.00 Regular price/
Only 71 items in stock!
For those of you who do ornamentation, scroll work, or murals, you will find this series of brushes extremely useful. Making the 'thin, thick, thin' stroke is simple with this brush. Available in 6 sizes.
Long, pointed teklon synthetic fiber
Very fine point for thin, painted lines
Rounded for ultimate medium dispersion (learn more)
Long handle for use with a mahlstick
Long handle brushes are popular with muralists
Excellent for surgical touch-ups
Description:Firm, synthetic fiber
Hair Length: .3 to 1.2" (13-27mm)
Dia./width: .5 to .3" (2.5-7.5mm)
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
FERRULE LENGTH
HAIR LENGTH
4
10.8" / 27.5cm
" / mm
" / mm
" / mm
6
11" / 28cm
" / mm
" / mm
" / mm
8
11.2" / 28.5cm
" / mm
" / mm
" / mm
10
11.3" / 28.7cm
12
11.5" / 29.2m
14
11.9" / 30.3m
BRUSH SPECIFICATIONS
HAIR TYPE
Teklon
BRUSH HOLD
Pencil Hold
USAGE
Trompe l'oeil; ornamentation
MEDIUM
Water
FERRULE
Tin
HANDLE
Wooden round
For those of you who do ornamentation, scroll work, or murals, you will find this series of brushes extremely useful. Making the 'thin, thick, thin' stroke is simple with this brush. Available in 6 sizes.
- Long, pointed teklon synthetic fiber
- Very fine point for thin, painted lines
- Rounded for ultimate medium dispersion (learn more)
- Long handle for use with a mahlstick
- Long handle brushes are popular with muralists
- Excellent for surgical touch-ups
- Description:Firm, synthetic fiber
- Hair Length: .3 to 1.2" (13-27mm)
- Dia./width: .5 to .3" (2.5-7.5mm)
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
| 4 | 10.8" / 27.5cm |
" / mm |
" / mm |
" / mm |
|
6 |
11" / 28cm |
" / mm |
" / mm |
" / mm |
|
8 |
11.2" / 28.5cm |
" / mm |
" / mm |
" / mm |
|
10 |
11.3" / 28.7cm |
|
|
|
|
12 |
11.5" / 29.2m |
|
|
|
|
14 |
11.9" / 30.3m |
|
|
|
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Teklon |
|
BRUSH HOLD |
Pencil Hold |
|
USAGE |
Trompe l'oeil; ornamentation |
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Filbert Striping Brush (Bordeaux Nylon) | TL-09
ITEM #: TL-09_Size-04
PRICE: $10.40 Regular price/
Only 20 items in stock!
This brush will give a long, delicate stroke for striping. Thick hair holds plenty of paint medium.
Long hair, filbert shape and domed tip
Stiffer Bordeaux synthetic fiber for ultimate control
See also longer hair version
Filbert shape is best for halftone gradual fading
Use effectively with a Striping Edge for faux molding & other linear projects
Best used in water medium
Brush hold: Conductor's hold
Tin ferrule with long wooden handle
Brush Care: Wash with soap
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
FERRULE LENGTH
HAIR LENGTH
4
12" / 30.4cm
8
12.4" / 31.5cm
10
12.6" / 32.1cm
12
12.9" / 32.8cm
14
12.8" / 32.5cm
16
13" / 33cm
BRUSH SPECIFICATIONS
HAIR TYPE
Bordeaux synthetic fiber
USAGE
transparent striping
This brush will give a long, delicate stroke for striping. Thick hair holds plenty of paint medium.
- Long hair, filbert shape and domed tip
- Stiffer Bordeaux synthetic fiber for ultimate control
- See also longer hair version
- Filbert shape is best for halftone gradual fading
- Use effectively with a Striping Edge for faux molding & other linear projects
- Best used in water medium
- Brush hold: Conductor's hold
- Tin ferrule with long wooden handle
- Brush Care: Wash with soap
SIZE TRANSLATIONS
|
SIZE
|
BRUSH LENGTH
|
FERRULE WIDTH
|
FERRULE LENGTH
|
HAIR LENGTH
|
|
4
|
12" / 30.4cm |
|
||
|
8
|
12.4" / 31.5cm | |||
|
10
|
12.6" / 32.1cm | |||
|
12
|
12.9" / 32.8cm | |||
|
14
|
12.8" / 32.5cm | |||
|
16
|
13" / 33cm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Bordeaux synthetic fiber |
|
USAGE |
transparent striping |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Alpha 6 "Straight Shot" Carbon Fiber Mahl Stick
ITEM #: TPAL-05
PRICE: $29.95 Regular price/
Only 5 items in stock!
Indestructible and lightweight carbon fiber Mahl stick with a high-density non-marking rubber tip. Alpha 6 custom carbon fiber products can be used with lacquers and urethanes and have an epoxy coating that is nearly indestructible.
Approximately 36" long.
Indestructible and lightweight carbon fiber Mahl stick with a high-density non-marking rubber tip. Alpha 6 custom carbon fiber products can be used with lacquers and urethanes and have an epoxy coating that is nearly indestructible.
Approximately 36" long.
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Alpha 6 Micro Palette
ITEM #: TPAL-01_Left
PRICE: $27.95 Regular price/
Only 2 items in stock!
Lightweight handmade stainless steel pallet for streamlined organization and easy cleanup. Sturdy construction and innovative design to make your artistic process smoother! Includes non-slip cork bottom surface protector.
These stainless steel pallets are made by hand in Detroit, MI by Alpha 6.
Please choose the appropriate configuration for your dominant hand. (For example, if you are left handed, choose the Left Handed option, which will allow you to hold the pallet with your right hand while you paint, and vice versa.)
Lightweight handmade stainless steel pallet for streamlined organization and easy cleanup. Sturdy construction and innovative design to make your artistic process smoother! Includes non-slip cork bottom surface protector.
These stainless steel pallets are made by hand in Detroit, MI by Alpha 6.
Please choose the appropriate configuration for your dominant hand. (For example, if you are left handed, choose the Left Handed option, which will allow you to hold the pallet with your right hand while you paint, and vice versa.)
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Slanted Striping Brush (Sable) | TL-11
ITEM #: TL-11_Size-06
PRICE: $20.80 Regular price/
Only 26 items in stock!
A pure sable brush pays for itself on the first job! Our primary brush for the thinnest, straightest lines desired in striping. Used on its side, every tip of the hand-selected sable hair should be in contact for the longest, and most consistent stripe. Truly, the slanted, sable striping brush will prove to be invaluable when used effectively with a Striping Edge for faux molding & other linear projects. Available in 5 sizes.
High-quality Kolinsky sable hair
Sable hair ages well and is self-sharpening
Long handle for use with Striping Edge
Slanted shape is best for straight, thin lines
Can be used in oil or water when dedicated (learn more)
Great for 'dirt marks' in corners and recessed molding
Great for opaque stripes and painted grout lines
Sable hair for striping
Brush Care: Water: Wash with soap, Oil: Thinned & lard
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
FERRULE LENGTH
HAIR LENGTH
6
12.3" / 31.2cm
8
12.3" / 32.2cm
10
12.4" / 31.5cm
12
12.5" / 31.7cm
14
12.8" / 32.5cm
BRUSH SPECIFICATIONS
HAIR TYPE
Sable Hair
BRUSH HOLD
Conductor's Hold
USAGE
Trompe l'oeil; striping; opaque accents
MEDIUM
Water or Oil
FERRULE
Tin
HANDLE
Wooden round long
A pure sable brush pays for itself on the first job! Our primary brush for the thinnest, straightest lines desired in striping. Used on its side, every tip of the hand-selected sable hair should be in contact for the longest, and most consistent stripe. Truly, the slanted, sable striping brush will prove to be invaluable when used effectively with a Striping Edge for faux molding & other linear projects. Available in 5 sizes.
- High-quality Kolinsky sable hair
- Sable hair ages well and is self-sharpening
- Long handle for use with Striping Edge
- Slanted shape is best for straight, thin lines
- Can be used in oil or water when dedicated (learn more)
- Great for 'dirt marks' in corners and recessed molding
- Great for opaque stripes and painted grout lines
- Sable hair for striping
- Brush Care: Water: Wash with soap, Oil: Thinned & lard
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 6 | 12.3" / 31.2cm |
|
||
| 8 | 12.3" / 32.2cm | |||
| 10 | 12.4" / 31.5cm | |||
| 12 | 12.5" / 31.7cm | |||
| 14 | 12.8" / 32.5cm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Sable Hair |
|
BRUSH HOLD |
Conductor's Hold |
|
USAGE |
Trompe l'oeil; striping; opaque accents |
|
MEDIUM |
Water or Oil |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Alpha6 Twister Brush Set
ITEM #: BPAL-03
PRICE: $29.95 Regular price/
Only 3 items in stock!
A liner/ scroller / pinstriper brush by Alpha 6 Brush is a much perfected full synthetic hair brush. This is the latest and greatest synthetic on the market today! It is unusual in the fact that it absorbs the paint and flows off the fibers in a controlled manner. This hair absorbs like a sponge. This brush is offered in sizes 0, 00 and 000!
A liner/ scroller / pinstriper brush by Alpha 6 Brush is a much perfected full synthetic hair brush. This is the latest and greatest synthetic on the market today! It is unusual in the fact that it absorbs the paint and flows off the fibers in a controlled manner. This hair absorbs like a sponge. This brush is offered in sizes 0, 00 and 000!
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Rondin Liner Striper Brush (Squirrel) | TL-14
ITEM #: TL-14_Size-08
PRICE: $10.90 Regular price/
Only 21 items in stock!
The deerhoof and the Rondin are the ultimate striping brushes- no taping! A rondin [rhon-dan] is not a stencil brush. Paint stripes on molding quickly by directly pinching the brush and using your pinkie as a guide. nothing compares to the rondin for a straight and even disbursement of opaque or transparent mediums over relief's. Squirrel hair, domed tip, for striping! Use all around for glazing small, intricate surfaces like chair legs & chandeliers. Available in 6 sizes.
Natural black squirrel with 5-10% synthetic fiber
Rounded for ultimate medium dispersion (learn more)
Can be used in oil/water when dedicated (learn more)
Use with Striping Edge for the longest stripe
The best for applying gold size for gilding
Wonderful for painting electrical plates
Small sizes for fading in grotesca, polychrome
Wash with soap: thinned and lard
SIZE TRANSLATIONS
SIZE
BRUSH LENGTH
FERRULE WIDTH
HAIR LENGTH
8
7.4" / 18.7cm
.24" / 6mm
.3" / 8mm
10
7.4" / 18.7cm
.28 / 7mm
.39" / 10mm
12
7.8" / 19.7cm
.32" / 8mm
.47" / 12mm
14
7.6" / 19.4cm
.35" / 9mm
.55" / 14mm
16
8.1" / 20.5cm
.39" / 10mm
.63" / 16mm
18
8.1" / 20.5cm
.43" / 11mm
.7" / 18mm
BRUSH SPECIFICATIONS
HAIR TYPE
Squirrel
BRUSH HOLD
Pencil Hold, Conductor's Hold
USAGE
Freehand striping on molding; opaque striping; fading
MEDIUM
Water or Oil
FERRULE
Tin
HANDLE
Wooden round short
The deerhoof and the Rondin are the ultimate striping brushes- no taping! A rondin [rhon-dan] is not a stencil brush. Paint stripes on molding quickly by directly pinching the brush and using your pinkie as a guide. nothing compares to the rondin for a straight and even disbursement of opaque or transparent mediums over relief's. Squirrel hair, domed tip, for striping! Use all around for glazing small, intricate surfaces like chair legs & chandeliers. Available in 6 sizes.
- Natural black squirrel with 5-10% synthetic fiber
- Rounded for ultimate medium dispersion (learn more)
- Can be used in oil/water when dedicated (learn more)
- Use with Striping Edge for the longest stripe
- The best for applying gold size for gilding
- Wonderful for painting electrical plates
- Small sizes for fading in grotesca, polychrome
- Wash with soap: thinned and lard
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH |
| 8 | 7.4" / 18.7cm | .24" / 6mm | .3" / 8mm |
| 10 |
7.4" / 18.7cm |
.28 / 7mm | .39" / 10mm |
| 12 |
7.8" / 19.7cm |
.32" / 8mm | .47" / 12mm |
| 14 | 7.6" / 19.4cm | .35" / 9mm | .55" / 14mm |
| 16 | 8.1" / 20.5cm | .39" / 10mm | .63" / 16mm |
| 18 | 8.1" / 20.5cm | .43" / 11mm | .7" / 18mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Squirrel |
|
BRUSH HOLD |
Pencil Hold, Conductor's Hold |
|
USAGE |
Freehand striping on molding; opaque striping; fading |
|
MEDIUM |
Water or Oil |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Alpha 6 Alphakrylik™ Metallic Acrylic Paint
ITEM #: PAL-01M_CRIM_2oz
PRICE: $10.95 Regular price/
Only 1 items in stock!
For Standard Colors 2.5 - 5 oz. bottles Click Here
For Standard Colors 8 oz. bottles Click Here
For Standard Colors 16- 32 oz. bottles Click Here
For Standard Colors Gallon Size Cans Click Here
For Electroshock Colors Click Here
Alpha6 Alphakrylik™ is a versatile paint for artists of many mediums.
It is a water based acrylic paint that cleans up with soap and water. It has super intense pigment, and durability.
Alphakrylik™ can be used by fine artists who paint on canvas, window splash artists who paint on windows, garment and shoe artists, as well as sign painters. It is truly a professional artist's paint but due to the easy clean up, can be used by anyone.
Alphakrylik™ lasts for years on windows, signs and canvas. This water based paint dries matte. It can however, be clear coated to create a glossy finish.
Click for SDS sheet
For Standard Colors 2.5 - 5 oz. bottles Click Here
For Standard Colors 8 oz. bottles Click Here
For Standard Colors 16- 32 oz. bottles Click Here
For Standard Colors Gallon Size Cans Click Here
For Electroshock Colors Click Here
Alpha6 Alphakrylik™ is a versatile paint for artists of many mediums.
It is a water based acrylic paint that cleans up with soap and water. It has super intense pigment, and durability.
Alphakrylik™ can be used by fine artists who paint on canvas, window splash artists who paint on windows, garment and shoe artists, as well as sign painters. It is truly a professional artist's paint but due to the easy clean up, can be used by anyone.
Alphakrylik™ lasts for years on windows, signs and canvas. This water based paint dries matte. It can however, be clear coated to create a glossy finish.
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Alpha6 Streaker Brush Set
ITEM #: BPAL-02
PRICE: $39.95 Regular price/
Only 8 items in stock!
Alpha 6 Streaker Brush set includes sizes. 2, 4, 6 and 8. Made with the finest synthetic hair, these brushes can be used with both Alphanamel and Alphakrylik! They clean up easily and will last for years!
Alpha 6 Streaker Brush set includes sizes. 2, 4, 6 and 8. Made with the finest synthetic hair, these brushes can be used with both Alphanamel and Alphakrylik! They clean up easily and will last for years!
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Alpha 6 50/50 Brush Box Insert
ITEM #: APAL-05
PRICE: $9.95 Regular price/
Only 1 items in stock!
High density urethane brush inserts double the capacity for storage and securely guarantee no more crushed brush hairs. Each insert has 3M industrial strength adhesive on back.
These are a direct replacement for the stock springs in the Mack Brush brush boxes and can also be used in any brand of box you may have.
1" x 4.5"
High density urethane brush inserts double the capacity for storage and securely guarantee no more crushed brush hairs. Each insert has 3M industrial strength adhesive on back.
These are a direct replacement for the stock springs in the Mack Brush brush boxes and can also be used in any brand of box you may have.
1" x 4.5"
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Alpha 6 Mondo Hanging Brush Cleaner Pot
ITEM #: APAL-03
PRICE: $34.95 Regular price/
Only 3 items in stock!
The latest version of the Alpha 6 Brush Cleaner Pot holds even more brushes! Up to 15!
Brushes hang from our brush holder into your cleaning solvent preventing them from bending or touching. Protect your expensive brushes!
The latest version of the Alpha 6 Brush Cleaner Pot holds even more brushes! Up to 15!
Brushes hang from our brush holder into your cleaning solvent preventing them from bending or touching. Protect your expensive brushes!
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
