9 products
9 products
PRO Pointed Glazing Brush (Bluetop) | GLZ-45
GLZ-45_Size-00000
Regular price $12.30/
Shipping calculated at checkout.
NEW! Our pointed water glazer has excellent line-cutting capabilities. Also known as a sash brush, this is a modern replica of the classic bristle/nylon version (GLZ-2). Available in 7 sizes.
- SOFT, Blue Polytop synthetic fiber
- Pointed shape allows for precise application
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for glazing stiles/rails, baseboard, and dentil molding
- Larger sizes best for glazing panels for faux marble/wood
- Small sizes for murals, and glazing tiny areas like mullions, dentils & window casing
- Also used to sketch wood heartgrain, & primary veins
- Wash with Soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH |
| 00000 | .45" / 11mm |
1.9" / 48mm |
|
| 000 | .6" / 15mm | 2.1" / 53mm | |
| 0 | .7" / 18mm | 2.3" / 58mm | |
| 2 | .83" / 21mm | 2.6" / 66mm | |
| 4 | .98" / 25mm | 2.9" / 73mm | |
| 6 | 1.2" / 29mm | 3" / 77mm | |
| 8 | 1.4" / 34mm | 3.2" / 81mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
BRUSH HOLD |
Pencil Hold, Drummer's Hold |
|
USAGE |
Applying glaze and base coat |
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
PRO Pointed Glazing Brush (Bristle, Nylon) | GLZ-41
GLZ-41_Size-000
Regular price $13.35/
Shipping calculated at checkout.
Our pointed water glazer will surely assist in your glazing with its excellent line cutting capabilities. The PRO SERIES is our extra fine / highest level of quality series. Also known as a sash brush, this is a modern replica of the classic bristle version (GLZ-4).
- Hand-shaped with select bristle fibers
- Premium stainless steel ferrule with hand-tied string
- Sealed handle for longevity
- Nylon synthetic fiber with 60% natural bristle
- Pointed shape allows for precise application
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for glazing stiles/rails, baseboard, and dentil molding
- Larger sizes best for glazing panels for faux marble/wood
- Small sizes for murals, and glazing tiny areas like mullions, dentils & window casing
- Also used to sketch wood heartgrain, & primary veins
- Wash with soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH |
| 000 | .4" / 11mm | 2.2" / 56mm | |
| 0 | .8 / 20mm | 2.4" / 62mm | |
| 2 | .9" / 22mm | 2.8" / 70mm | |
| 4 | 1" / 26mm | 3" / 75mm | |
| 6 | 1.2" / 31mm | 3.3" / 84mm | |
| 8 | 1.3" / 34mm | 3.5" / 89mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
BRUSH HOLD |
Pencil Hold, Drummer's Hold |
|
USAGE |
Applying glaze and base coat |
|
MEDIUM |
Water or Oil |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
PRO Domed Glazing Brush (Bluetop) | GLZ-34
GLZ-34_Size-02
Regular price $15.50/
Shipping calculated at checkout.
NEW! Blue POLYTOP BRUSH. The domed water glazer is the work horse of decorative painting. This is a modern replica of the classic bristle/nylon blend version.
- SOFT, Blue POLYTOP synthetic fiber
- Slightly domed shape for full coverage
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for 'breaking up the glaze'
- Large size can glaze an entire wall with speed
- Use only in water mediums
- Wash with Soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH |
| 2 | .86" / 22mm | 2.5" / 64mm | |
| 4 | 1" / 26mm | 2.5" / 64mm | |
| 6 | 1.2" / 29mm | 2.8" / 72mm | |
| 8 | 1.3" / 33mm | 3.1" / 78mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Blue Polytop Synthetic |
|
BRUSH HOLD |
Pencil Hold, Drummer's Hold |
|
USAGE |
Applying glaze & base coat, stippling, adding texture |
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Domed Glazing Brush (Bristle, Nylon) | GLZ-01D
GLZ-01D_Size-02
Regular price $20.30 Sale price $18.27 Save $2.03/
Shipping calculated at checkout.
Our domed water glazer is the work horse of decorative painting. This is our highest level of quality. This is a modern replica of the classic full bristle version.
- Hand-shaped with select bristle fibers
- Premium stainless steel ferrule with hand-tied string
- Sealed handle for longevity
- Nylon synthetic fiber with 60% natural bristle
- Slightly domed shape for full coverage
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for 'breaking up the glaze'
- Large size can glaze an entire wall with speed
- Application/Usage: applying glaze and basecoat; stippling; adding texture
- Preferred Medium: Water
- Brush Ferrule/Handle: Tin, wooden round long
- Brush Hold: Pencil Hold, Drummer's Hold
- Hair Length: 2-3" (60-72mm)
- Dia./width: .5-1.25" (25-32mm)
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Pointed Glazing Brush (Bristle) | GLZ-04D
GLZ-04D_Size-04
Regular price $26.75 Sale price $24.08 Save $2.67/
Shipping calculated at checkout.
Our pointed bristle glazer will surely assist in your glazing with its excellent line cutting capabilities. It as a 'sash', this sturdy brush can 'cut' a perfect line, work in tight corners, & accurately glaze your woodgraining or faux marble projects.
- High quality bristle keeps it's shape
- Pointed shape allows for precise application
- Rounded for ultimate medium dispersion (learn more)
- Can be used in oil/water when dedicated (learn more)
- Perfect for glazing stiles/rails, baseboard, and dentil molding
- Larger sizes best for glazing panels for woodgraining
BRUSH SPECIFICATIONS
|
HAIR TYPE
|
Natural Bristle
|
|
BRUSH HOLD
|
Pencil Hold, Drummer's Hold
|
|
USAGE
|
Precisely applying glaze and basecoat; woodgraining; faux marble
|
|
MEDIUM
|
Oil or Water
|
|
FERRULE
|
Copper
|
|
HANDLE
|
Wooden round long
|
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
| 4 |
" / mm |
" / mm |
" / mm |
|
|
8 |
" / mm |
" / mm |
" / mm |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Domed Glazing Brush (Bristle) | GLZ-03D
GLZ-03D_Size-04
Regular price $25.70 Sale price $23.13 Save $2.57/
Shipping calculated at checkout.
This original design is ingenious in it's rounded shape and thick hair. The hand tied red, cotton string is handsomely traditional in this model. Our natural bristle glazing brushes should be a standard item in your decorative painting kit.
- High quality bristle keeps it's shape
- Slightly domed shape for fast coverage
- Rounded for ultimate medium dispersion (learn more)
- Can be used in oil/water when dedicated (learn more)
- Perfect for 'breaking up the glaze'
- Works well painting basecoats
- Glaze panels with speed
- With size 8, glaze entire wall - applies better than a roller!
- Description: Bristle hair for OIL/WATER mediums
- Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
- Hair Length: 3-3.5" (76-90mm)
- Dia./width: 1-1.25" (25-32mm)
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 4 | " / mm | " / mm |
" / mm |
|
| 8 | " / mm | " / mm |
" / mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle |
|
BRUSH HOLD |
Pencil Hold, Drummer's Hold |
|
USAGE |
Applying glaze and base coat; adding texture; rough stipple |
|
MEDIUM |
Oil, Water |
|
FERRULE |
Copper |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
PRO Domed Glazing Brush (Bristle, Nylon) | GLZ-31
GLZ-31_Size-02
Regular price $15.50/
Shipping calculated at checkout.
Our domed water glazer is the work horse of decorative painting. The Pro SERIES is a high level of quality. The EXTRA FINE Nylon/Bristle fiber is a nylon blend replica of the classic full bristle version (GLZ-3).
- Hand-shaped with select bristle fibers
- Premium stainless steel ferrule with hand-tied string
- Sealed handle for longevity
- Nylon synthetic fiber with 60% natural bristle
- Slightly domed shape for full coverage
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for 'breaking up the glaze'
- Large size can glaze an entire wall with speed
- Wash with Soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH | FERRULE LENGTH |
| 2 | .9" / 23mm | 2.3" / 59mm | 0.9"/25mm | |
| 4 | 1" / 27mm | 2.9" / 69mm |
1"/26mm |
|
| 6 | 1.2" / 32mm | 3.1" / 79mm |
1.2"/32mm |
|
| 8 | 1.3" / 34mm | 3.1" / 79mm |
1.3"/34mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
BRUSH HOLD |
Pencil Hold, Drummer's Hold |
|
USAGE |
Applying glaze & base coat, stippling, adding texture |
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Ultimate Domed Glazing Brush (Bristle, Nylon) | GLZ-01
GLZ-01_Size-04
Regular price $20.50/
Shipping calculated at checkout.
Our domed water glazer is the work horse of decorative painting. This is our highest level of quality. This is a modern replica of the classic full bristle version (GLZ-3).
- Hand-shaped with select bristle fibers
- Premium stainless steel ferrule with hand-tied string
- Sealed handle for longevity
- Nylon synthetic fiber with 60% natural bristle
- Slightly domed shape for full coverage
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for 'breaking up the glaze'
- Large size can glaze an entire wall with speed
- Brush Care: Wash with soap
- Hair Length: 2-3" (60-72mm)
- Dia./width: .5-1.25" (25-32mm)
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 4 | 1"/26mm | 1"/26mm |
2.8"/72mm |
|
| 8 | 1.2"/32mm | 1.2"/32mm |
3.2"/82mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
BRUSH HOLD |
Pencil Hold, Drummer's Hold |
|
USAGE |
Applying glaze and basecoat; stippling; adding texture |
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Economy Pointed Glazing Brush (Bristle, Nylon) | GLZ-43
GLZ-43_Size-02
Regular price $8.55/
Shipping calculated at checkout.
Our pointed water glazer will surely assist in your glazing with its excellent line cutting capabilities. Also known as a sash brush, this is a modern replica of the classic bristle version (GLZ-4).
- Hand-shaped with select bristle fibers
- Premium stainless steel ferrule with hand-tied string
- Sealed handle for longevity
- Nylon synthetic fiber with 60% natural bristle
- Pointed shape allows for precise application
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for glazing stiles/rails, baseboard, and dentil molding
- Larger sizes best for glazing panels for faux marble/wood
- Small sizes for murals, and glazing tiny areas like mullions, dentils & window casing
- Also used to sketch wood heartgrain, & primary veins
- Preferred Medium: Water
- Brush Ferrule/Handle: Tin, plastic round long
- Brush Hair Type: Natural Bristle/Nylon blend
- Brush Care: Wash with soap
- Hair Length: 2-3" (60-72mm)
- Dia./width: .5-1.25" (25-32mm)
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
|
2 |
0.8"/21mm | 0.8"/21mm | 2.2"/56mm | |
|
4 |
0.9"/25mm | 0.9"/25mm | 2.3"/59mm | |
|
6 |
1.1"/29mm | 1.1"/30mm | 2.5"/65mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle/Nylon blend |
|
BRUSH HOLD |
Pencil hold, Drumstick hold |
|
USAGE |
|
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Plastic round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
