HV'Art Additive Crosslinker
ITEM #: PHV-07_160PRICE: $37.80 Regular price Regularly: $42.00 Sale price Save $4.20
HV’Art Additives developed to enable decorative finishes to perform the widest possible range of durability requirements.
GLOSS LEVEL & COLOUR: N/A, determined by the coating the additive is used with.
AREA OF USE:
HV160 is to be added to the final coat of a surface finish, to further increase the chemical and mechanical resistance of the coating. It is not advised to add to any prior coats, as this can impede best inter-coat adhesion.
When added at a concentration of 0.5-1% it considerably improves hardness, abrasion resistance, resistance to aggressive household chemicals, and blocking resistance against tannins or bleed from the substrate.
5% by volume of the coating material, after pre-thinning (see below)
Dilute 1 part HV160 with 5 parts water immediately before addition to the chosen coating.
The coating mixture containing additive should be used immediately after preparation and used within 12hrs. VOC Content: 40 g/ltr (almost zero effect on the coating mixture overall VOC due to small dosage used)
AREA OF USE:
HV190 can be used to achieve adhesion directly to glass for purposes of Decorative Splashbacks, room divider panels, etc.
It can also be used to double-crosslink coatings already blended with HV160, to achieve optimum possible durability results.
6% by volume of base material, after pre-thinning (see below)
Dilute 1 part HV190 with 1 part water immediately before use.
The coating mixture containing additive should be used immediately after preparation and used within 12hrs.
In the case of using both additives, they shall be added one after the other following the above order, slowly and under constant stirring.
VOC Content: 106 g/ltr (almost zero effect on the coating mixture overall VOC due to small dosage used)