Name: Badger Softener | GLZ-15
Brand: Faux Brushes
SKU: GLZ-15_Size-02
Price: 75.0 USD
Availability: InStock

Badger Softener | GLZ-15

GLZ-15_Size-02

$75.00

Shipping calculated at checkout.

Our classic hand mounted badger brush is made out of the finest grouping of water badger hair. Stay clear of the 'BAD'-ger impostor whose hair is made out of goat hair that has been dipped into black paint to look like a real badger. Stiffer hair is good for softening and easier to clean as you go.

3/4 inch thick, hand selected badger hair, which repels water
Resists fanning out with overuse
Best used with thin reversible water mediums (i.e. gouache, beer glaze)
Size 2 best for smoothing intricate surfaces
Size 4 is the universal size - best for faux marble/woodgraining
Size 6 the best for your largest smoothing job - amazingly productive brush!

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
2		.8" / 20mm	2.2" / 55mm	2.6" / 65mm
4		.8" / 20mm	4.1" / 104mm	2.7"/ 69mm
6		.8" / 20mm	6.3" / 160mm	2.7" / 69mm

BRUSH SPECIFICATIONS

HAIR TYPE	Badger
BRUSH HOLD	Conductor's Hold
USAGE	Softening
MEDIUM	Water
FERRULE	Wood
HANDLE	Wooden round medium

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

PRO Pointed Glazing Brush (Bluetop) | GLZ-45

PRO Pointed Glazing Brush (Bluetop) | GLZ-45

GLZ-45_Size-00000

$11.50

Shipping calculated at checkout.

NEW! Our pointed water glazer has excellent line-cutting capabilities. Also known as a sash brush, this is a modern replica of the classic bristle/nylon version (GLZ-2). Available in 7 sizes.

SOFT, Blue Polytop synthetic fiber
Pointed shape allows for precise application
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for glazing stiles/rails, baseboard, and dentil molding
Larger sizes best for glazing panels for faux marble/wood
Small sizes for murals, and glazing tiny areas like mullions, dentils & window casing
Also used to sketch wood heartgrain, & primary veins
Wash with Soap

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	HAIR LENGTH
00000		.45" / 11mm	1.9" / 48mm
000		.6" / 15mm	2.1" / 53mm
0		.7" / 18mm	2.3" / 58mm
2		.83" / 21mm	2.6" / 66mm
4		.98" / 25mm	2.9" / 73mm
6		1.2" / 29mm	3" / 77mm
8		1.4" / 34mm	3.2" / 81mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle / Nylon blend
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Applying glaze and base coat
MEDIUM	Water
FERRULE	Tin
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Deerhoof Liner Striper Brush (Skunk) | TL-31

TL-31_Size-02

$16.00

Shipping calculated at checkout.

The deerhoof and the Rondin are the ultimate striping brushes- no taping needed! A deerhoof is designed for striping color or size, much like the rondin brush. The deerhoof shape offers a distinct slant, which allows for optimum surface contact. The deerhoof is best for applying size or color to flat or curved surfaces. In order to make this brush so dense, its ferrule is constructed by hand, with quill and wire. By pinching the brush at the heal, long and exact stripes can be achieved.

A must-have for gilders

Can be used in oil/water when dedicated

Most comparable with the Rondin brush

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
2
4
6
8
10

BRUSH SPECIFICATIONS

HAIR TYPE	Skunk
BRUSH HOLD	Choked Pen Hold
USAGE	Painting freehand stripes or applying size
MEDIUM	Water or Oil
FERRULE	Wire-tied quill
HANDLE	Wooden round short

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Original Pointed Glazing Brush (Bristle)

Original Pointed Glazing Brush (Bristle) | GLZ-04D

Original Pointed Glazing Brush (Bristle) | GLZ-04D

GLZ-04D_Size-04

$25.00

Shipping calculated at checkout.

Our pointed bristle glazer will surely assist in your glazing with its excellent line cutting capabilities. It as a 'sash', this sturdy brush can 'cut' a perfect line, work in tight corners, & accurately glaze your woodgraining or faux marble projects.

High quality bristle keeps it's shape
Pointed shape allows for precise application
Rounded for ultimate medium dispersion (learn more)
Can be used in oil/water when dedicated (learn more)
Perfect for glazing stiles/rails, baseboard, and dentil molding
Larger sizes best for glazing panels for woodgraining

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Precisely applying glaze and basecoat; woodgraining; faux marble
MEDIUM	Oil or Water
FERRULE	Copper
HANDLE	Wooden round long

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
4		" / mm	" / mm	" / mm
8		" / mm	" / mm	" / mm

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Original Domed Glazing Brush (Bristle, Nylon)

Original Domed Glazing Brush (Bristle, Nylon) | GLZ-01D

Original Domed Glazing Brush (Bristle, Nylon) | GLZ-01D

GLZ-01D_Size-02

$19.00

Shipping calculated at checkout.

Our domed water glazer is the work horse of decorative painting. This is our highest level of quality. This is a modern replica of the classic full bristle version.

Hand-shaped with select bristle fibers
Premium stainless steel ferrule with hand-tied string
Sealed handle for longevity
Nylon synthetic fiber with 60% natural bristle
Slightly domed shape for full coverage
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for 'breaking up the glaze'
Large size can glaze an entire wall with speed
Application/Usage: applying glaze and basecoat; stippling; adding texture
Preferred Medium: Water
Brush Ferrule/Handle: Tin, wooden round long
Brush Hold: Pencil Hold, Drummer's Hold
Hair Length: 2-3" (60-72mm)
Dia./width: .5-1.25" (25-32mm)

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

PRO Domed Glazing Brush (Bluetop) | GLZ-34

PRO Domed Glazing Brush (Bluetop) | GLZ-34

GLZ-34_Size-02

$14.50

Shipping calculated at checkout.

NEW! Blue POLYTOP BRUSH. The domed water glazer is the work horse of decorative painting. This is a modern replica of the classic bristle/nylon blend version.

SOFT, Blue POLYTOP synthetic fiber
Slightly domed shape for full coverage
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for 'breaking up the glaze'
Large size can glaze an entire wall with speed
Use only in water mediums
Wash with Soap

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	HAIR LENGTH
2		.86" / 22mm	2.5" / 64mm
4		1" / 26mm	2.5" / 64mm
6		1.2" / 29mm	2.8" / 72mm
8		1.3" / 33mm	3.1" / 78mm

BRUSH SPECIFICATIONS

HAIR TYPE	Blue Polytop Synthetic
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Applying glaze & base coat, stippling, adding texture
MEDIUM	Water
FERRULE	Tin
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

PRO Domed Glazing Brush (Bristle, Nylon) | GLZ-31

PRO Domed Glazing Brush (Bristle, Nylon) | GLZ-31

GLZ-31_Size-02

$14.50

Shipping calculated at checkout.

Our domed water glazer is the work horse of decorative painting. The Pro SERIES is a high level of quality. The EXTRA FINE Nylon/Bristle fiber is a nylon blend replica of the classic full bristle version (GLZ-3).

Hand-shaped with select bristle fibers
Premium stainless steel ferrule with hand-tied string
Sealed handle for longevity
Nylon synthetic fiber with 60% natural bristle
Slightly domed shape for full coverage
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for 'breaking up the glaze'
Large size can glaze an entire wall with speed
Wash with Soap

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	HAIR LENGTH	FERRULE LENGTH
2		.9" / 23mm	2.3" / 59mm	0.9"/25mm
4		1" / 27mm	2.9" / 69mm	1"/26mm
6		1.2" / 32mm	3.1" / 79mm	1.2"/32mm
8		1.3" / 34mm	3.1" / 79mm	1.3"/34mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle / Nylon blend
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Applying glaze & base coat, stippling, adding texture
MEDIUM	Water
FERRULE	Tin
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Original Domed Glazing Brush (Bristle) | GLZ-03D

Original Domed Glazing Brush (Bristle) | GLZ-03D

GLZ-03D_Size-04

$24.00

Shipping calculated at checkout.

This original design is ingenious in it's rounded shape and thick hair. The hand tied red, cotton string is handsomely traditional in this model. Our natural bristle glazing brushes should be a standard item in your decorative painting kit.

High quality bristle keeps it's shape
Slightly domed shape for fast coverage
Rounded for ultimate medium dispersion (learn more)
Can be used in oil/water when dedicated (learn more)
Perfect for 'breaking up the glaze'
Works well painting basecoats
Glaze panels with speed
With size 8, glaze entire wall - applies better than a roller!
Description: Bristle hair for OIL/WATER mediums
Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
Hair Length: 3-3.5" (76-90mm)
Dia./width: 1-1.25" (25-32mm)

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
4		" / mm	" / mm	" / mm
8		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Applying glaze and base coat; adding texture; rough stipple
MEDIUM	Oil, Water
FERRULE	Copper
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Ultimate Domed Glazing Brush (Bristle, Nylon) | GLZ-01

GLZ-01_Size-04

$19.00

Shipping calculated at checkout.

Our domed water glazer is the work horse of decorative painting. This is our highest level of quality. This is a modern replica of the classic full bristle version (GLZ-3).

Hand-shaped with select bristle fibers
Premium stainless steel ferrule with hand-tied string
Sealed handle for longevity
Nylon synthetic fiber with 60% natural bristle
Slightly domed shape for full coverage
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for 'breaking up the glaze'
Large size can glaze an entire wall with speed
Brush Care: Wash with soap
Hair Length: 2-3" (60-72mm)
Dia./width: .5-1.25" (25-32mm)

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
4		1"/26mm	1"/26mm	2.8"/72mm
8		1.2"/32mm	1.2"/32mm	3.2"/82mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle / Nylon blend
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Applying glaze and basecoat; stippling; adding texture
MEDIUM	Water
FERRULE	Tin
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Rondin Liner Striper Brush (Squirrel) | TL-14

Rondin Liner Striper Brush (Squirrel) | TL-14

TL-14_Size-08

$9.50

Shipping calculated at checkout.

The deerhoof and the Rondin are the ultimate striping brushes- no taping! A rondin [rhon-dan] is not a stencil brush. Paint stripes on molding quickly by directly pinching the brush and using your pinkie as a guide. nothing compares to the rondin for a straight and even disbursement of opaque or transparent mediums over relief's. Squirrel hair, domed tip, for striping! Use all around for glazing small, intricate surfaces like chair legs & chandeliers. Available in 6 sizes.

Natural black squirrel with 5-10% synthetic fiber
Rounded for ultimate medium dispersion (learn more)
Can be used in oil/water when dedicated (learn more)
Use with Striping Edge for the longest stripe
The best for applying gold size for gilding
Wonderful for painting electrical plates
Small sizes for fading in grotesca, polychrome
Wash with soap: thinned and lard

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	HAIR LENGTH
8	7.25"	.24" / 6mm	.3" / 8mm
10	7.375"	.28 / 7mm	.39" / 10mm
12	7.5"	.32" / 8mm	.47" / 12mm
14	7.875"	.35" / 9mm	.55" / 14mm
16	8"	.39" / 10mm	.63" / 16mm
18	8"	.43" / 11mm	.7" / 18mm

BRUSH SPECIFICATIONS

HAIR TYPE	Squirrel
BRUSH HOLD	Pencil Hold, Conductor's Hold
USAGE	Freehand striping on molding; opaque striping; fading
MEDIUM	Water or Oil
FERRULE	Tin
HANDLE	Wooden round short

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Economy Pointed Glazing Brush (Bristle, Nylon) | GLZ-43

GLZ-43_Size-02

$8.00

Shipping calculated at checkout.

Our pointed water glazer will surely assist in your glazing with its excellent line cutting capabilities. Also known as a sash brush, this is a modern replica of the classic bristle version (GLZ -4).

Hand-shaped with select bristle fibers
Premium stainless steel ferrule with hand-tied string
Sealed handle for longevity
Nylon synthetic fiber with 60% natural bristle
Pointed shape allows for precise application
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for glazing stiles/rails, baseboard, and dentil molding
Larger sizes best for glazing panels for faux marble/wood
Small sizes for murals, and glazing tiny areas like mullions, dentils & window casing
Also used to sketch wood heartgrain, & primary veins
Preferred Medium: Water
Brush Ferrule/Handle: Tin, plastic round long
Brush Hair Type: Natural Bristle/Nylon blend
Brush Care: Wash with soap
Hair Length: 2-3" (60-72mm)
Dia./width: .5-1.25" (25-32mm)

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
2		0.8"/21mm	0.8"/21mm	2.2"/56mm
4		0.9"/25mm	0.9"/25mm	2.3"/59mm
6		1.1"/29mm	1.1"/30mm	2.5"/65mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle/Nylon blend
BRUSH HOLD	Pencil hold, Drumstick hold
USAGE
MEDIUM	Water
FERRULE	Tin
HANDLE	Plastic round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

PRO Pointed Glazing Brush (Bristle, Nylon) | GLZ-41

PRO Pointed Glazing Brush (Bristle, Nylon) | GLZ-41

GLZ-41_Size-000

$12.50

Shipping calculated at checkout.

Our pointed water glazer will surely assist in your glazing with its excellent line cutting capabilities. The PRO SERIES is our extra fine / highest level of quality series. Also known as a sash brush, this is a modern replica of the classic bristle version (GLZ -4).

Hand-shaped with select bristle fibers
Premium stainless steel ferrule with hand-tied string
Sealed handle for longevity
Nylon synthetic fiber with 60% natural bristle
Pointed shape allows for precise application
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for glazing stiles/rails, baseboard, and dentil molding
Larger sizes best for glazing panels for faux marble/wood
Small sizes for murals, and glazing tiny areas like mullions, dentils & window casing
Also used to sketch wood heartgrain, & primary veins
Wash with soap

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	HAIR LENGTH
000		.4" / 11mm	2.2" / 56mm
0		.8 / 20mm	2.4" / 62mm
2		.9" / 22mm	2.8" / 70mm
4		1" / 26mm	3" / 75mm
6		1.2" / 31mm	3.3" / 84mm
8		1.3" / 34mm	3.5" / 89mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle / Nylon blend
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Applying glaze and base coat
MEDIUM	Water or Oil
FERRULE	Tin
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Spattering Brush (Bristle) | GLZ-16

GLZ-16

$16.00

Shipping calculated at checkout.

A true solution for an often mishandled task. This stiff, short haired bristle, spattering brush can be used like a tooth brush or used as a stencil brush. The spatter brush is hand tied with string and domed to allow consistent & controlled spray.

Stiff, natural bristle hair
Control the spatter - light/heavy, thick/thin, open/closed
Use a palette knife to draw the spatter.
Make the your final step count with controlled spattering
Best for fly-specking stone texture & leather
Perfect for pores/worm holes in woodgraining
Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap

SIZE TRANSLATIONS

BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
	0.7"/18mm	0.5"/13mm	1"/26mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle
BRUSH HOLD	Drummer's Hold
USAGE	Spattering; spattering; water marks; worm holes
MEDIUM	Oil, Water
FERRULE	String
HANDLE	Wood round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Gilding Tip (Badger) | GD-03

GD-03

$24.50

Shipping calculated at checkout.

Fine, long hair for picking up and placing gold leaf. Gilding tips are used to pick up gold leaf from a book and transfer it to a sized surface. Tips are best used in conjunction with a Gilding mop to tap and smooth the transferred leaf. Tips can be used with water or oil size.

Badger hair is the stiffest
Available only in size 100
Best used with heavier leaf
Best for surface gilding
Most economical tip
Best tip for beginners
See other tips: Squirrel tip and Sable tip
Description: Fine, long hair for picking up and placing gold leaf
Application/Usage: moving metal leaf to a sized surface
Preferred Medium: oil or water
Brush Ferrule/Handle: paper
Brush Hair Type: Natural Badger
Brush Hold: pen hold
Brush Care: clean with a damp rag only

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
60		" / mm	" / mm	" / mm
80		" / mm	" / mm	" / mm
100		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Badger
BRUSH HOLD	Pen hold
USAGE	Moving metal leaf to a sized surface
MEDIUM	Oil or water
FERRULE
HANDLE	Paper

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Ultimate Pointed Glazing Brush (Bristle, Nylon) | GLZ-02

GLZ-02_Size-04

$27.00

Shipping calculated at checkout.

Our pointed water glazer will surely assist in your glazing with its excellent line cutting capabilities. The ULTIMATE SERIES is our highest level of quality. Also known as a sash brush, this is a modern replica of the classic bristle version (GLZ-4).

Hand-shaped with select bristle fibers
Premium stainless steel ferrule with hand-tied string
Sealed handle for longevity
Nylon synthetic fiber with 60% natural bristle
Pointed shape allows for precise application
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for glazing stiles/rails, baseboard, and dentil molding
Larger sizes best for glazing panels for faux marble/wood
Small sizes for murals, and glazing tiny areas like mullions, dentils & window casing
Also used to sketch wood heartgrain, & primary veins

SIZE TRANSLATION

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
2		0.8"/21mm	0.8"/21mm	2"/51mm
4		0.9"/25mm	0.9"/25mm	2.9"/74mm
8		1.2"/32mm	1.2"/32mm	3.4"/86mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle / Nylon blend
BRUSH HOLD	Conductor's Hold, Pencil Hold
USAGE	Precisely applying glaze and basecoat; woodgraining; faux marble
MEDIUM	Water
FERRULE	Tin
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Gilding Bole Burnisher (Bristle) | GD-08

GD-08_Size-00

$25.00

Shipping calculated at checkout.

Use these domed burnishing brushes to delicately grind down bole in preparation for water gilding. Available in 3 sizes.

Densly packed black bristle hair, domed tip, string-tied
Brush Care: Clean with a damp cloth and mild soap
Extremely stiff hair delivers an aggressive burnish

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
0
1
2

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle
BRUSH HOLD	Handle Grip With Wrist Action, Baseball Hold
USAGE	Stippling and strie
MEDIUM	Oil , Water
FERRULE	Wood
HANDLE	Wood

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Gilding Sizing Brush (Ox Ear) | GD-07

GD-07_Size-040

$39.00

Shipping calculated at checkout.

Made with Brown Ox ear hair. The water gilding gesso brush is used to apply water size. The brush is densly packed with goat hair and wrapped with a copper ferrule. The hair retains a heavy amount of material making it ideal for large applications.

Description: Densly packed goat hair, flat tip, for applying size
Brush Care: wash with mild soap
Found in Kits:
See Also:
Fine, densely packed goat hair
For sizing and applying gesso for water gilding
Best used on flat surfaces or frames
For more size applicators, see Rondin, Deerhoof, Gilderês mop

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
40		" / mm	" / mm	" / mm
50		" / mm	" / mm	" / mm
60		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural skunk
BRUSH HOLD	Pen hold
USAGE	For sizing in water gilding or tonal layering
MEDIUM	Water
FERRULE	Copper
HANDLE	Wooden

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Gilding Pointed Sizing Brush (Squirrel) | GD-06

GD-06

$74.00

Shipping calculated at checkout.

Squirrel hair, extremely pointed tip for precision application of size. The pointed gilding brush is used to apply size to a curved relief. Also the fine point is perfect for applying size in a small section for touch-up.

Description: Squirrel hair, extremely pointed tip for precision application of size
Brush Care: wash with mild soap
Found in Kits:
See Also:
Squirrel hair is a soft, natural hair
A good sizing brush for water gilding
For more size applicators, see Rondin, Deerhoof, Gilderês mop, or water sizing brush

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
7		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural squirrel
BRUSH HOLD	Pen hold
USAGE	Applying size to small areas
MEDIUM	Oil or water
FERRULE	Wire tied quill
HANDLE	Wooden

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Gilding Dusting Mop (Goat) | GD-05

GD-05_Size-06

$24.50

Shipping calculated at checkout.

Made with goat hair - a stiffer and more economic version ofA gilding mop is used to gently tap and smooth metal leaf that has been applied to a sized surface. If the metal was applied using the entire leaf, it is recommended to use a Gilderês tip to transfer the leaf. A gilding mop is also used to skewer excess gold and for final burnishing. This classic round shape will reach deep profiles. The mop can also be used to apply water size to curved molding and relief areas.

Description: Economic mix with synthetic for use with heavier metals

Brush Care: Clean with a damp cloth and mild soap
Squirrel/goat mix is a stiffer mop
A good sizing brush for water gilding
Best used with heavier leaf
See Pure Squirrel mop
Use also fortonal layering in faux marble and woodgraining

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
6		" / mm	" / mm	" / mm
10		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural squirrel goat mix
BRUSH HOLD	Pen hold
USAGE	Skewer metal leaf or to apply size for water gilding
MEDIUM	Oil or water
FERRULE	Wire tied quill
HANDLE	Wooden

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Gilding Sizing Mop (Squirrel) | GD-04

GD-04_Size-06

$45.00

Shipping calculated at checkout.

A gilding mop is used to gently tap and smooth metal leaf that has been applied to a sized surface. If the metal was applied using the entire leaf, it is recommended to use a Gilding tip to transfer the leaf. A gilding mop is also used to skewer excess gold and for final burnishing. This classic round shape will reach deep profiles. The mop can also be used to apply water size to curved molding and relief areas.

Squirrel hair is the softest mop
A good sizing brush for water gilding
Description: Soft hair, domed tip for smoothing and removing excess leaf
Brush Care: Wash with a damp cloth and mild soap
Found in Kits:
See Also:
Best used with delicate leaf
See Squirrel/Goat mix mop
See also a chiqueteur for large projects

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
6		" / mm	" / mm	" / mm
8		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Squirrel
BRUSH HOLD	Pen hold
USAGE	Skewer metal leaf or to apply size for water gilding
MEDIUM	Oil or water
FERRULE	Wire tied quill
HANDLE	Wooden

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Gilding Tip (Sable) | GD-02

GD-02

$54.00

Shipping calculated at checkout.

Fine, long hair for picking up and placing gold leaf. Gilding tips are used to pick up gold leaf from a book and transfer it to a sized surface. Tips are best used in conjunction with a Gilder's mop to tap and smooth the transferred leaf. Tips can be used with water or oil size.

Sable hair is the softest tip
Sable hair has the most spring
Premium tool for gilding with full leaf
Best for most fragile and delicate gold
See other tips: Squirrel tip and Badger tip
Description: Fine, long hair for picking up and placing gold leaf
Brush Shape: Flat
Brush Ferrule/Handle: paper
Brush Hair Type: Natural Sable
Brush Care: Clean with a damp cloth only

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
80		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Sable Hair
BRUSH HOLD	Pen hold
USAGE	Moving metal leaf to a sized surface
MEDIUM	Oil or Water
FERRULE
HANDLE	Paper

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Gilding Tip (Squirrel) | GD-01

GD-01_Size-060

$16.50

Shipping calculated at checkout.

Gilding tips are used to pick up gold leaf from a book and transfer it to a sized surface. Tips are best used in conjunction with a Gilding Mop to tap and smooth the transferred leaf. Tips can be used with water or oil size.

Squirrel hair has a medium stiffness
Squirrel hair has medium spring
Available in 3 sizes
Smallest size is best for touch up
See other tips: Sable tip and Badger tip
Description: Fine, long hair for picking up and placing gold leaf
Brush Care: Clean with a damp cloth only

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
60		" / mm	" / mm	" / mm
80		" / mm	" / mm	" / mm
100		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Squirrel
BRUSH HOLD	Pen hold
USAGE	Moving metal leaf to a sized surface
MEDIUM	Oil or Water
FERRULE
HANDLE	Paper

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.