7 products
7 products
Spalter Brush (Bristle, Nylon) | GLZ-07
GLZ-07_Size040
Regular price $10.15/
Shipping calculated at checkout.
The spalter is one of the most used tools in our decorative brush kit. Unlike the average cheap brush, our spalter has a thick row (1/3 inch) of short hair that is densely packed with a bristle/nylon blend for ultimate performance and control for today's water mediums. The smaller sizes have a variety of uses, from basecoats to final glazing, 'stretching' to softening. Available in 8 sizes. Amazing for entire wall strie or criss-cross.
- Nylon synthetic fiber with 50% natural bristle
- stretch glaze for ultimate consistency
- Softens unwanted brush/roller marks
- Excellent for applying thin varnish and waxes
- Fine/subtle strie
- See GLZ-5 for more information
- Water - Wash with soap, Oil: Thinned & wash w/ soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 40 | .4" / 9mm | 1.6" / 40mm | 1.4" / 36mm | |
| 60 | .4" / 9mm | 2.4" / 60mm | 1.4" / 36mm | |
| 80 | .4" / 9mm | 3.1" / 80mm | 1.4" / 36mm | |
| 100 | .4" / 9mm | 4" / 100mm | 1.6" / 41mm | |
| 150 | .4" / 9mm | 6" / 150mm | 1.8" / 46mm | |
| 200 | .4" / 9mm | 8" / 200mm | 1.9" / 47mm | |
| 250 | .4" / 9mm | 9.9" / 250mm | 1.8" / 46mm | |
| 300 | .4" / 9mm | 11.8" / 300mm | 1.7" / 44mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
BRUSH HOLD |
Drummer's Hold, "Quack Motion" |
|
USAGE |
Soften roller marks on base coat & varnish applications; Moire |
|
MEDIUM |
Water or Oil |
|
FERRULE |
Copper |
|
HANDLE |
Wooden flat short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Tooth Spalter Brush (Bristle, Nylon) | GLZ-08
GLZ-08_Size-040
Regular price $11.75/
Shipping calculated at checkout.
Our tooth spalter has been cut to create 'teeth'. In decorative painting, this bristle/blend brush is essential for a deep strie, brushed texture, & straight graining techniques in water mediums. Our spalters are over 1/3 " thick. One of our most important brushes - this is a must for your decorative painting kit. Available in 6 sizes.
- Nylon synthetic fiber with 50% natural bristle
- Machine cut teeth
- The best brush for patina and aging techniques (dry-brushing)
- Pulling wet basecoat when a heavily brushed texture is desired
- Criss-cross techniques
- See GLZ-6 for additional information
- Water: Wash with soap, Oil: Thinned & wash w/ soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 40 | .4" / 9mm | 1.6" / 40mm | 1.5" / 37mm | |
| 60 | .4" / 9mm | 2.4" / 60mm | 1.6" / 40mm | |
| 80 | .4" / 9mm | 3.1" / 80mm | 1.4" / 36mm | |
| 100 | .4" / 10mm | 4" / 100mm | 1.7" / 42mm | |
| 150 | .4" / 10mm | 6" / 150mm | 1.9" / 47mm | |
| 200 | .4" / 10mm | 8" / 200mm | 2.1" / 54mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
BRUSH HOLD |
Drummer's Hold |
|
USAGE |
Strie; straight graining in wood |
|
MEDIUM |
Water or Oil |
|
FERRULE |
Copper |
|
HANDLE |
Wooden flat short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Spalter Brush (Bluetop) | GLZ-24
GLZ-24_Size-040
Regular price $10.40/
Shipping calculated at checkout.
From baseboards to walls! Use this silky, BLUE hair spalter to help apply water varnishes and thin latex basecoats. Use with the BLUE Oval Brush
2/3 inch thick, Blue, POLYTOP nylon synthetic
For best results, keep the brush saturated with varnish
Traditional Spalter shape to "tip" the varnish
For water applications only
Brush Care: Wash with soap
BRUSH SPECIFICATIONS
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 40 | .4" / 9mm | 1.6" / 40mm | 1.4" / 36mm | |
| 50 | .4" / 9mm | 2" / 50mm | 1.4" / 36mm | |
| 80 | .4" / 9mm | 3.1" / 80mm | 1.4" / 36mm | |
| 100 | .4" / 9mm | 4" / 100mm | 1.6" / 41mm | |
| 150 | .4" / 9mm | 6" / 150mm | 1.8" / 46mm | |
| 200 | .4" / 9mm | 8" / 200mm | 1.9" / 47mm | |
| 250 | .4" / 9mm | 9.9" / 250mm | 1.8" / 46mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Polytop Synthetic |
|
BRUSH HOLD |
Drummer's Hold, "Quack Motion" |
|
USAGE |
Strie; Varnishing |
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden flat short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Stubby Spalter Brush (Nylon, Bristle) | GLZ-07D
GLZ-07D_Size-040
Regular price $10.15 Sale price $9.14 Save $1.01/
Shipping calculated at checkout.
The spalter is one of the most used tools in our decorative brush kit. Unlike the average chip brush, our spalter has a thick row (1/3 inch) of short hair that is densely packed with a bristle/nylon blend for ultimate performance and control for today's water mediums. The smaller sizes have a variety of uses, from basecoats to final glazing, 'stretching' to softening. Available in 6 sizes.
- Nylon synthetic fiber with 50% natural bristle
- stretch glaze for ultimate consistency
- Softens unwanted brush/roller marks
- Excellent for applying thin varnish and waxes
- Fine/subtle strie
- Application/Usage: stretch; soften roller marks on basecoat & varnish applications; moire
- Preferred Medium: Oil/Water
- Brush Ferrule/Handle: copper, wooden flat short
- Brush Hair Type: Natural Bristle/Nylon blend
- Brush Hold: Drummer's Hold, "Quack Motion"
- Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
- Hair Length: 1.5-1.7" (38-45mm), 2" (51mm)
- Dia./width: 1.6" (40mm), 2.2" (60mm), 3.1" (80mm), 4", 6" (150mm), 8" (200mm)
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Stubby Tooth Spalter (Nylon, Bristle) | GLZ-08D
GLZ-08D_Size-060
Regular price $16.05 Sale price $14.45 Save $1.60/
Shipping calculated at checkout.
Our tooth spalter has been cut to create 'teeth'. In decorative painting, this bristle/blend brush is essential for a deep strie, brushed texture, & straight graining techniques in water mediums. Our spalters are over 1/3 " thick. This is a must for your decorative painting kit. Available in 6 sizes.
- Nylon synthetic fiber with 50% natural bristle
- Machine cut teeth
- The best brush for patina and aging techniques (dry-brushing)
- Pulling wet basecoat when a heavily brushed texture is desired
- Criss-cross techniques
- Application/Usage: strie; straight graining in wood
- Preferred Medium: Oil/Water
- Brush Ferrule/Handle: copper, wooden flat short
- Brush Hair Type: Natural Bristle/Nylon blend
- Brush Hold: Drummer's Hold
- Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
- Hair Length: 1.5-1.7" (38-45mm), 2" (51mm)
- Dia./width: 1.6" (40mm), 2.2" (60mm), 3.1" (80mm), 4", 6" (150mm), 8" (200mm)
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
4-in-1 Flat Spalter Brush (Bristle) | GLZ-09
GLZ-09
Regular price $39.00/
Shipping calculated at checkout.
Our long haired spalter is a combination of a spalter, softener, and a mini-flogger. This natural bristle brush becomes economical because of it's versatility. Our spalters are over 1/3" thick. From strie to corner stippling, smoothing to moire, this brush does it all. Keep it in your back pocket and it will get used often.
- Hand-selected bristle hair, longer than a Spalter
- Brush 'springs' into action (learn more)
- Softens unwanted brush/roller marks
- 4 uses: softening, strie, stipple, & moire
- A versatile brush for the price
- Water: Wash with soap, Oil: Thinned & wash w/ soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 100 | .16" / 4mm | 4" / 100mm | 2.2" / 55mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle |
|
BRUSH HOLD |
Drummer's Hold, Conductor's Hold |
|
USAGE |
Corner stippling; strie |
|
MEDIUM |
Water or Oil |
|
FERRULE |
Copper |
|
HANDLE |
Wooden flat short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Oval Varnish Brush (Bluetop) | GLZ-25
GLZ-25_Size-040
Regular price $25.70/
Shipping calculated at checkout.
Great for FURNITURE! This Italian-inspired oval brush has a thick hair density that allows for greater medium retention. Our new BLUE hair will help apply water varnishes and water basecoats softly and efficiently. We've introduced this brush a year ago and the feedback has been superb! Our BLUE brushes seem to be a brush breakthrough! Use with the BLUE Spalter for the best, glass-like varnish finish.
- For best results, keep the brush saturated with varnish
- 2/3 inch thick, nylon synthetic
- Oval shape great mix between flat and round brushes
- Description: Soft, blue nylon for WATER medium
- Brush Care: Water: Wash with soap
- Dia./width: 1.5, 2.5 inches
- Brush 'springs' into action (learn more)
- For water applications only
- Small sizes great for painting stiles/rails, small panels, mullions, etc.
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH
|
FERRULE WIDTH
|
FERRULE LENGTH
|
HAIR LENGTH
|
| 40 |
0.3"/ 9mm
|
1.5"/ 40mm
|
1.8" / 45mm
|
|
| 50 |
0.3"/ 9mm
|
1.9"/ 50mm
|
1.8" / 45mm
|
|
| 60 |
0.3" 9mm
|
2.3" / 60mm
|
1.8" / 45mm
|
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Polytop Synthetic |
|
BRUSH HOLD |
Drummer's Hold, Pencil Hold |
|
USAGE |
Varnishing |
|
MEDIUM |
Water |
|
FERRULE |
Copper |
|
HANDLE |
Wooden flat medium |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
