25 products
25 products
PRO Pointed Glazing Brush (Bluetop) | GLZ-45
GLZ-45_Size-00000
Regular price Sale price $12.30/
Shipping calculated at checkout.
Our BLUETOP PRO SERIES POINTED glazing (sash) brushes have a classic round shape for ultimate paint medium dispersion. It is used to apply glaze, paint, wax, and thin textures. Use like a standard paint brush or scrubbing motion.
- PRO SERIES: Premier quality hairs, varnished wood handle, competitively priced
- See also: BLUETOP ECONOMY SERIES
- Bristle versions: ULTIMATE BRISTLE, PRO BRISTLE and ECONOMY BRISTLE SERIES.
- The POINTED shape is best for maximum control of paint medium. See also: domed glazing brush
- Rounded for ultimate medium dispersion (learn more)
- Tin ferrule with varnished long wooden handle
- Brush hold: Pencil Hold, Drummer's Hold
- Brush care: Wash thoroughly with soap, shape or hang to dry
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH |
| 00000 |
10.6" / 26.8cm |
.45" / 11mm |
1.9" / 48mm |
| 000 | 11.6" / 29.5cm | .6" / 15mm | 2.1" / 53mm |
| 0 | 11.4" / 29cm | .7" / 18mm | 2.3" / 58mm |
| 2 | 12.2" / 31cm | .83" / 21mm | 2.6" / 66mm |
| 4 | 12.6" / 32.1cm | .98" / 25mm | 2.9" / 73mm |
| 6 | 13.2" / 33.5cm | 1.2" / 29mm | 3" / 77mm |
| 8 |
13.4" / 34.1cm |
1.4" / 34mm | 3.2" / 81mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Bluetop synthetic fiber |
|
USAGE |
Application of varnish, paint, glaze medium |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Badger Softener | GLZ-15
GLZ-15_Size-02
Regular price Sale price $80.25/
Shipping calculated at checkout.
Our classic hand mounted badger brush is made out of the finest grouping of water badger hair. Stay clear of the 'BAD'-ger impostor whose hair is made out of goat hair that has been dipped into black paint to look like a real badger. Stiffer hair is good for softening and easier to clean as you go.
- 3/4 inch thick, hand selected badger hair, which repels water
- Resists fanning out with overuse
- Best used with thin reversible water mediums (i.e. gouache, beer glaze)
- Size 2 best for smoothing intricate surfaces
- Size 4 is the universal size - best for faux marble/woodgraining
- Size 6 the best for your largest smoothing job - amazingly productive brush!
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 2 | 8.38"/ 21.3cm | .8" / 20mm | 2.2" / 55mm | 2.6" / 65mm |
| 4 | 10.6" / 26.8cm | .8" / 20mm | 4.1" / 104mm | 2.7"/ 69mm |
| 6 | .8" / 20mm | 6.3" / 160mm | 2.7" / 69mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Badger |
|
BRUSH HOLD |
Conductor's Hold |
|
USAGE |
Softening |
|
MEDIUM |
Water |
|
FERRULE |
Wood |
|
HANDLE |
Wooden round medium |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
GOLDEN PRO Matting Additive
PGZ-14_8oz
Regular price $16.00/
Shipping calculated at checkout.
GOLDEN PRO Matting Additive is a concentrated medium that creates MATTE finishes with high transparency. Compatible with most water-bourne systems.
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
GOLDEN PRO Sheer Glazing Medium
PGZ-12
Regular price $22.29/
Shipping calculated at checkout.
Thinner glazing medium for a sheer finish.
GOLDEN PRO Sheer glazing medium provides the extended dry-time of traditional oil mediums without compromising strength or transparency. Dries to a satin finish. Tint with water-compatible colors like DISPERSIONS, or, for the longest open time, use with Slow-dry FLUID COLORS . Use this ultra-thin glazing medium in specialized glazing techniques such as faux marble and woodgraining. Use the Glazing medium glaze for large-scale projects. Working time is typically 15-45 minutes depending on technique and substrate. For a sheen that is more matte, mix with MATTING ADDITIVE.
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
GOLDEN PRO Glazing Medium
PGZ-11
Regular price $22.29/
Shipping calculated at checkout.
Versatile glazing medium with the longest open time.
GOLDEN PRO 32 oz. Glazing Medium, provides the extended dry-time of traditional oil mediums without compromising strength or transparency. Dries to a satin finish. Tint with water-compatible colors like DISPERSIONS, or, for the longest open time, use with Slow-dry FLUID COLORS . Use for large-scale projects. Working time is typically 15-45 minutes depending on technique and substrate. For a sheen that is more matte, mix with MATTING ADDITIVE.
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Chiqueteur | MB-09
MB-09_Size-08
Regular price $133.75/
Shipping calculated at checkout.
The Rolls Royce of faux marble brushes, the chiqueteur [sheik-ter] is used for painting backgrounds of faux marble and stone finishes. Experience ultimate controlled randomness with this specialty brush. Available in 2 sizes.
- Soft square tip squirrel hair with 5-10% synthetic nylon
- Wire tied natural quill
- No more messy hands
- Great for skewering real gold leaf w/o scratching
- Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH
|
|
8
|
1.1"/30mm
|
1.1"/30mm
|
2.4"/61mm
|
|
|
10
|
10.1" / 25.7cm |
1.1"/30mm
|
1.1"/30mm
|
2.6"/66mm
|
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Squirrel |
|
BRUSH HOLD |
Pencil Hold |
|
USAGE |
Marble, Fragmenting, Chiqueteuring, Stone Texture |
|
MEDIUM |
Oil or Water |
|
FERRULE |
Wire-Tied Quilled |
|
HANDLE |
Wooden Round Medium |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Short Brecher Brush (Samina Nylon) | MB-18
MB-18
Regular price $19.25/
Shipping calculated at checkout.
TRIPLE ZERO small size. Use this brecher, [breh-sher] to create thin line fragments to thick veins with a flick of the wrist.
- Sable-like, soft samina synthetic fiber
- Wire tied natural quill
- Great for breching on molding
- Best for bathing breche fragments
- Brush 'springs' into action (learn more)
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
|
Size 000 |
11.4" / 29cm | 0.1"/5mm | 0.1"/5mm | 1.1"/30mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Samina Nylon |
|
FERRULE |
Wire-Tied Quill |
|
HANDLE |
Wooden, Short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
3-Header Pointed Brecher Brush (Samina Nylon) | MB-17
MB-17
Regular price $98.45/
Shipping calculated at checkout.
Use this 3-headed brecher for faux marble veins and creating a fine, multidirectional marble background .
- Samina fiber, 3-pointed tips
- Brush Care: water: Wash with soap
- samina synthetic fiber
- Wire tied natural quill
- Background texture for Sea Green, Yellow Flower, Imperador and more
- Great for over glazing faux marble and fissures
SIZE TRANSLATION
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
| 12.4" / 31.4cm |
0.5"/15mm |
1"/27mm |
1.9"/48mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE
|
Samina
|
|
BRUSH HOLD
|
Conductor's Hold, Pencil Hold
|
|
USAGE
|
Marble breching; hooking
|
|
MEDIUM
|
Water
|
|
FERRULE
|
Quill
|
|
HANDLE
|
Wooden round medium
|
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Round Badger Softener | MB-10
MB-10_Size-14
Regular price $128.40/
Shipping calculated at checkout.
This densely-packed softener is perfect for all small and detailed areas. Our classic hand mounted badger brush is made out of the finest grouping of water badger hair. Stay clear of the 'BAD'-ger impostor whose hair is made out of goat hair that has been dipped into black paint to look like a real badger. These impostors are far too soft to move the glaze. Stiffer hair is good for softening and easier to clean as you go.
- 3/4 inch thick, hand selected badger hair, which repels water
- Resists fanning out with overuse
- Best used with thin reversible water mediums (i.e. gouache, beer glaze)
- See also Water Softener- a true innovation for thicker water mediums
- Fantastic for burnishing Dutch metal w/o scratching (for gold leaf, Chiqueteur)
- Size 2 best for smoothing intricate surfaces
- Clean with a damp cloth and mild soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 14 | 9.6" / 24.5cm | .85" / 21.5mm | .85" / 21.5mm | 2.8 / 71mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Badger Hair |
|
BRUSH HOLD |
Pencil Hold |
|
USAGE |
Softening; burnishing |
|
MEDIUM |
Water |
|
FERRULE |
Wire-tied Quill |
|
HANDLE |
Wooden round medium |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
4-in-1 Flat Spalter Brush (Bristle) | GLZ-09
GLZ-09
Regular price $39.00/
Shipping calculated at checkout.
Our long haired spalter is a combination of a spalter, softener, and a mini-flogger. This natural bristle brush becomes economical because of it's versatility. Our spalters are over 1/3" thick. From strie to corner stippling, smoothing to moire, this brush does it all. Keep it in your back pocket and it will get used often.
- Hand-selected bristle hair, longer than a Spalter
- Brush 'springs' into action (learn more)
- Softens unwanted brush/roller marks
- 4 uses: softening, strie, stipple, & moire
- A versatile brush for the price
- Water: Wash with soap, Oil: Thinned & wash w/ soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 100 | 8.9" / 22.7cm | .16" / 4mm | 4" / 100mm | 2.2" / 55mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle |
|
BRUSH HOLD |
Drummer's Hold, Conductor's Hold |
|
USAGE |
Corner stippling; strie |
|
MEDIUM |
Water or Oil |
|
FERRULE |
Copper |
|
HANDLE |
Wooden flat short |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Stubby Spalter Brush (Nylon, Bristle) | GLZ-07D
GLZ-07D_Size-040
Regular price $10.15 Sale price $7.11 Save $3.04/
Shipping calculated at checkout.
The spalter is one of the most used tools in our decorative brush kit. Unlike the average chip brush, our spalter has a thick row (1/3 inch) of short hair that is densely packed with a bristle/nylon blend for ultimate performance and control for today's water mediums. The smaller sizes have a variety of uses, from basecoats to final glazing, 'stretching' to softening. Available in 6 sizes.
- Nylon synthetic fiber with 50% natural bristle
- stretch glaze for ultimate consistency
- Softens unwanted brush/roller marks
- Excellent for applying thin varnish and waxes
- Fine/subtle strie
- Application/Usage: stretch; soften roller marks on basecoat & varnish applications; moire
- Preferred Medium: Oil/Water
- Brush Ferrule/Handle: copper, wooden flat short
- Brush Hair Type: Natural Bristle/Nylon blend
- Brush Hold: Drummer's Hold, "Quack Motion"
- Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
- Hair Length: 1.5-1.7" (38-45mm), 2" (51mm)
- Dia./width: 1.6" (40mm), 2.2" (60mm), 3.1" (80mm), 4", 6" (150mm), 8" (200mm)
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Economy Pointed Glazing Brush (Bristle, Nylon) | GLZ-43
GLZ-43_Size-02
Regular price Sale price $8.55/
Shipping calculated at checkout.
Our ECONOMY SERIES POINTED glazing (sash) brushes have a classic round shape for ultimate paint medium dispersion. It is used to apply glaze, paint, wax, and thin textures. Use like a standard paint brush or scrubbing motion.
- ECONOMY SERIES: consistent quality hair, lightweight plastic handle, low price
- See other levels: ULTIMATE and PRO SERIES
- and our BLUETOP PRO and BLUETOP ECONOMY SERIES.
- The POINTED shape is best for maximum control of paint medium. See also: domed glazing brush
- Rounded for ultimate medium dispersion (learn more)
- Tin ferrule with varnished long plastic handle
- Brush hold: Pencil Hold, Drummer's Hold
- Brush care: Wash thoroughly with soap, shape or hang to dry
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
|
2 |
10.5" / 26.6cm | 0.8"/21mm | 0.8"/21mm | 2.2"/56mm |
|
4 |
10.8" / 27.5cm | 0.9"/25mm | 0.9"/25mm | 2.3"/59mm |
|
6 |
11.6" / 29.5cm | 1.1"/29mm | 1.1"/30mm | 2.5"/65mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
USAGE |
Application of varnish, paint, glaze medium |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
PRO Pointed Glazing Brush (Bristle, Nylon) | GLZ-41
GLZ-41_Size-000
Regular price Sale price $13.35/
Shipping calculated at checkout.
Our PRO SERIES POINTED glazing (sash) brushes have a classic round shape for ultimate paint medium dispersion. It is used to apply glaze, paint, wax, and thin textures. Use like a standard paint brush or scrubbing motion.
- PRO SERIES: Premier quality hairs, varnished wood handle, competitively priced
- See other levels: ULTIMATE and ECONOMY SERIES
- and our BLUETOP PRO and BLUETOP ECONOMY SERIES.
- The POINTED shape is best for maximum control of paint medium. See also: domed glazing brush
- Rounded for ultimate medium dispersion (learn more)
- Tin ferrule with varnished long wooden handle
- Brush hold: Pencil Hold, Drummer's Hold
- Brush care: Wash thoroughly with soap, shape or hang to dry
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH |
| 000 | 11.6" / 29.4cm | .4" / 11mm | 2.2" / 56mm |
| 0 | 11.7" / 29.8cm | .8 / 20mm | 2.4" / 62mm |
| 2 | 12.2" / 31cm | .9" / 22mm | 2.8" / 70mm |
| 4 | 12.7" / 32.2cm | 1" / 26mm | 3" / 75mm |
| 6 | 13.4" / 34cm | 1.2" / 31mm | 3.3" / 84mm |
| 8 | 13.5" / 34.4cm | 1.3" / 34mm | 3.5" / 89mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
USAGE |
Application of varnish, paint, glaze medium |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Pointed Glazing Brush (Bristle) | GLZ-04D
GLZ-04D_Size-04
Regular price $26.75 Sale price $18.73 Save $8.02/
Shipping calculated at checkout.
Our pointed bristle glazer will surely assist in your glazing with its excellent line cutting capabilities. It as a 'sash', this sturdy brush can 'cut' a perfect line, work in tight corners, & accurately glaze your woodgraining or faux marble projects.
- High quality bristle keeps it's shape
- Pointed shape allows for precise application
- Rounded for ultimate medium dispersion (learn more)
- Can be used in oil/water when dedicated (learn more)
- Perfect for glazing stiles/rails, baseboard, and dentil molding
- Larger sizes best for glazing panels for woodgraining
BRUSH SPECIFICATIONS
|
HAIR TYPE
|
Natural Bristle
|
|
BRUSH HOLD
|
Pencil Hold, Drummer's Hold
|
|
USAGE
|
Precisely applying glaze and basecoat; woodgraining; faux marble
|
|
MEDIUM
|
Oil or Water
|
|
FERRULE
|
Copper
|
|
HANDLE
|
Wooden round long
|
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
| 4 |
" / mm |
" / mm |
" / mm |
|
|
8 |
" / mm |
" / mm |
" / mm |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
PRO Domed Glazing Brush (Bluetop) | GLZ-34
GLZ-34_Size-02
Regular price Sale price $15.50/
Shipping calculated at checkout.
Our BLUETOP PRO SERIES DOMED glazing (sash) brushes have a classic round shape for ultimate paint medium dispersion. It is used to apply glaze, paint, wax, and thin textures. Use like a standard paint brush or scrubbing motion.
- PRO SERIES: Premier quality hairs, varnished wood handle, competitively priced
- See also: BLUETOP ECONOMY SERIES
- Bristle versions: ULTIMATE BRISTLE, PRO BRISTLE and ECONOMY BRISTLE SERIES.
- The DOMED shape is best for maximum coverage of surfaces. See also pointed glazing brush.
- Rounded for ultimate medium dispersion (learn more)
- Brush hold: Pencil Hold, Drummer's Hold
- Tin ferrule with varnished long wooden handle
- Brush care: Wash thoroughly with soap, shape or hang to dry
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH |
| 2 | 12" / 30.5cm | .86" / 22mm | 2.5" / 64mm |
| 4 | 12.3" / 31.2cm | 1" / 26mm | 2.5" / 64mm |
| 6 | 12.9" / 32.8cm | 1.2" / 29mm | 2.8" / 72mm |
| 8 | 13.3" / 33.8cm | 1.3" / 33mm | 3.1" / 78mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Bluetop synthetic fiber |
|
USAGE |
Application of varnish, paint, glaze medium; stippling |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
PRO Domed Glazing Brush (Bristle, Nylon) | GLZ-31
GLZ-31_Size-02
Regular price Sale price $15.50/
Shipping calculated at checkout.
Our PRO SERIES DOMED glazing (sash) brushes have a classic round shape for ultimate paint medium dispersion. It is used to apply glaze, paint, wax, and thin textures. Use like a standard paint brush or scrubbing motion.
- PRO SERIES: Premier quality hairs, varnished wood handle, competitively priced
- See other levels: ULTIMATE and ECONOMY SERIES
- and our BLUETOP PRO and BLUETOP ECONOMY SERIES.
- The DOMED shape is best for maximum coverage of surfaces. See also pointed glazing brush.
- Rounded for ultimate medium dispersion (learn more)
- Brush hold: Pencil Hold, Drummer's Hold
- Tin ferrule with varnished long wooden handle
- Brush care: Wash thoroughly with soap, shape or hang to dry
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH | FERRULE LENGTH |
| 2 | 11.8" / 30cm | .9" / 23mm | 2.3" / 59mm | 0.9"/25mm |
| 4 | 12.2" / 31.1cm | 1" / 27mm | 2.9" / 69mm |
1"/26mm |
| 6 | 13.2" / 33.5cm | 1.2" / 32mm | 3.1" / 79mm |
1.2"/32mm |
| 8 | 13.2" / 33.6cm | 1.3" / 34mm | 3.1" / 79mm |
1.3"/34mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
USAGE |
Application of varnish, paint, glaze medium; stippling |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Domed Glazing Brush (Bristle) | GLZ-03D
GLZ-03D_Size-04
Regular price $25.70 Sale price $17.99 Save $7.71/
Shipping calculated at checkout.
This original design is ingenious in it's rounded shape and thick hair. The hand tied red, cotton string is handsomely traditional in this model. Our natural bristle glazing brushes should be a standard item in your decorative painting kit.
- High quality bristle keeps it's shape
- Slightly domed shape for fast coverage
- Rounded for ultimate medium dispersion (learn more)
- Can be used in oil/water when dedicated (learn more)
- Perfect for 'breaking up the glaze'
- Works well painting basecoats
- Glaze panels with speed
- With size 8, glaze entire wall - applies better than a roller!
- Description: Bristle hair for OIL/WATER mediums
- Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
- Hair Length: 3-3.5" (76-90mm)
- Dia./width: 1-1.25" (25-32mm)
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 4 | " / mm | " / mm |
" / mm |
|
| 8 | " / mm | " / mm |
" / mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle |
|
BRUSH HOLD |
Pencil Hold, Drummer's Hold |
|
USAGE |
Applying glaze and base coat; adding texture; rough stipple |
|
MEDIUM |
Oil, Water |
|
FERRULE |
Copper |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Spalter Brush - Regular (Bluetop) | GLZ-24
GLZ-24_Size-040
Regular price Sale price $10.00/
Shipping calculated at checkout.
Unique blue, silky fiber in our traditional spalter (mottler) shape and standard length (45mm = 1.75"). This brush is primarily used to aid application of varnishes, thinned latex paints, and acrylic glazes. Unlike the "chip" brush that can be found in standard hardware stores, our spalter brush has a thick row of densely packed hair for ultimate performance and control.
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 40 |
7.8" / 19.7cm |
.4" / 9mm | 1.6" / 40mm | 1.8" / 45mm |
| 60 | 7.8" / 19.7cm | .4" / 9mm | 2.3" / 60mm |
1.8" / 45mm |
| 80 |
7.8" / 19.7cm |
.4" / 9mm | 3.1" / 80mm |
1.8" / 45mm |
| 100 | 8.9" / 22.5cm | .4" / 9mm | 4" / 100mm |
1.8" / 45mm |
| 150 | 9.1" / 23.1cm | .4" / 9mm | 6" / 150mm |
1.8" / 45mm |
| 200 | 9.6" / 24.5cm | .4" / 9mm | 8" / 200mm |
1.8" / 45mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Bluetop synthetic |
|
USAGE |
Strie; moire; softening paint; varnish |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Ultimate Domed Glazing Brush (Bristle, Nylon) | GLZ-01
GLZ-01_Size-04
Regular price $20.50/
Shipping calculated at checkout.
Our ULTIMATE SERIES DOMED glazing (sash) brushes have a classic round shape for ultimate paint medium dispersion. It is used to apply glaze, paint, wax, and thin textures. Use like a standard paint brush or scrubbing motion.
- ULTIMATE SERIES: Highest quality, hand-picked bristles shaped by hand, varnished wood handle, still competitively priced
- See other levels: PRO and ECONOMY SERIES
- and our BLUETOP PRO and BLUETOP ECONOMY SERIES.
- The DOMED shape is best for maximum coverage of surfaces. See also pointed glazing brush.
- Rounded for ultimate medium dispersion (learn more)
- Brush hold: Pencil Hold, Drummer's Hold
- Tin ferrule with varnished long wooden handle
- Brush care: Wash thoroughly with soap, shape or hang to dry
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | FERRULE LENGTH |
HAIR LENGTH |
| 4 | 12.4" / 31.6cm | 1" / 26mm | 1" / 26mm |
2.8" / 72mm |
| 8 | 13.5" / 34.3cm | 1.2" / 32mm | 1.2" / 32mm | 3.2" / 82mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle / Nylon blend |
|
USAGE |
Application of varnish, paint, glaze medium; stippling |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Stippling Brush (Bristle) | GLZ-10
GLZ-10
Regular price $50.25/
Shipping calculated at checkout.
Use this for controlled, parallel veins when painting faux marble and semiprecious stone.
- For painting onyx marble
- Stippler
- Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
|
3.6" (92mm) |
" / mm |
2.4" (61mm) |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Natural Bristle |
|
BRUSH HOLD |
Handle Grip With Wrist Action, Baseball Hold |
|
USAGE |
Stippling and strie |
|
MEDIUM |
Oil or Water |
|
FERRULE |
Wood |
|
HANDLE |
Wood |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Domed Glazing Brush (Bristle, Nylon) | GLZ-01D
GLZ-01D_Size-04
Regular price $23.50 Sale price $16.45 Save $7.05/
Shipping calculated at checkout.
Our domed water glazer is the work horse of decorative painting. This is our highest level of quality. This is a modern replica of the classic full bristle version.
- Hand-shaped with select bristle fibers
- Premium stainless steel ferrule with hand-tied string
- Sealed handle for longevity
- Nylon synthetic fiber with 60% natural bristle
- Slightly domed shape for full coverage
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for 'breaking up the glaze'
- Large size can glaze an entire wall with speed
- Application/Usage: applying glaze and basecoat; stippling; adding texture
- Preferred Medium: Water
- Brush Ferrule/Handle: Tin, wooden round long
- Brush Hold: Pencil Hold, Drummer's Hold
- Hair Length: 2-3" (60-72mm)
- Dia./width: .5-1.25" (25-32mm)
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
