All Techniques

Filter
2 products

2 products

Quick view
Dusting Brush (Bristle, Nylon) | GLZ-21
$18.20
Quick view
Dusting Brush (Bluetop) | GLZ-22
$20.30

Dusting Brush (Bristle, Nylon) | GLZ-21

Dusting Brush (Bristle, Nylon) | GLZ-21

GLZ-21

$18.20
/
Shipping calculated at checkout.

Have yourself a designated, quality dust brush and make dusting a pleasant and necessary habit. Dust is the most common cause of a grainy surface. Go for quality - sand and then dust between every phase of decorative painting. Dust every surface!

  • 5 flat rows of hearty, black bristle for extra dust collection
  • 1.2 inches thick
  • Ergonomic banana shape
  • Great for wall and baseboard dusting
  • Fits in your back pocket
  • Check out our new Blue POLYTOP Duster 
  • Brush Care: Clean with a damp cloth
SIZE TRANSLATIONS
SIZE BRUSH LENGTH FERRULE WIDTH FERRULE LENGTH

HAIR LENGTH

0.3"/9mm
 3.1"/80mm
 1.6"/43mm


BRUSH SPECIFICATIONS

 HAIR TYPE

Natural Bristle / Nylon Blend

BRUSH HOLD

 Baseball Hold

USAGE

Dusting before each step in decorative painting

MEDIUM

Water or Oil

FERRULE

N/A

HANDLE

wooden "boxy" banana shape

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle


To minimize brush shedding, you should:

  1. Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
  2. Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
  3. Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.


Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.


Proper cleaning procedure

for oil/water and large or small brushes:

  Oil Medium Water Medium
Large Brushes Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Dusting Brush (Bluetop) | GLZ-22

Dusting Brush (Bluetop) | GLZ-22

GLZ-22

$20.30
/
Shipping calculated at checkout.

Have a designated duster, and save your finest brushes from wear. Try our ergonomic nylon duster to help support a professional finish. Make dusting a pleasant and necessary habit. Dust is the most common cause of a grainy surface. Go for quality - sand and then dust between every phase of decorative painting. Dust every surface!

  • Classic Banana Shape
  • 100% strong blue POLYTOP
  • 4 rows of fiber, almost 1 inch thick
  • Ergonomic banana shape
  • A softer version than Deluxe Duster - great for delicate surfaces.
  • Fits well in your back pocket

SIZE TRANSLATIONS

SIZE BRUSH LENGTH FERRULE WIDTH FERRULE LENGTH

HAIR LENGTH


8" / 203mm 2.4" / 61mm 


BRUSH SPECIFICATIONS

 HAIR TYPE

Polytop Synthetic

BRUSH HOLD

 Baseball Hold

USAGE

Dusting before each step in decorative painting

MEDIUM

Oil or Water

FERRULE

N/A

HANDLE

Wooden "boxy" banana shape

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle


To minimize brush shedding, you should:

  1. Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
  2. Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
  3. Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.


Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.


Proper cleaning procedure

for oil/water and large or small brushes:

  Oil Medium Water Medium
Large Brushes Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.