Save 10% when You Buy a Kit or Set
No Coupon Needed
5 products
5 products
Original Stubby Spalter Brush (Nylon, Bristle) | GLZ-07D
GLZ-7D_Size-040
Regular price $9.50/
Shipping calculated at checkout.
The spalter is one of the most used tools in our decorative brush kit. Unlike the average chip brush, our spalter has a thick row (1/3 inch) of short hair that is densely packed with a bristle/nylon blend for ultimate performance and control for today's water mediums. The smaller sizes have a variety of uses, from basecoats to final glazing, 'stretching' to softening. Available in 6 sizes.
- Nylon synthetic fiber with 50% natural bristle
- stretch glaze for ultimate consistency
- Softens unwanted brush/roller marks
- Excellent for applying thin varnish and waxes
- Fine/subtle strie
- Application/Usage: stretch; soften roller marks on basecoat & varnish applications; moire
- Preferred Medium: Oil/Water
- Brush Ferrule/Handle: copper, wooden flat short
- Brush Hair Type: Natural Bristle/Nylon blend
- Brush Hold: Drummer's Hold, "Quack Motion"
- Brush Care: Water: Wash with soap, Oil: Thinned & wash w/ soap
- Hair Length: 1.5-1.7" (38-45mm), 2" (51mm)
- Dia./width: 1.6" (40mm), 2.2" (60mm), 3.1" (80mm), 4", 6" (150mm), 8" (200mm)
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
PRO Domed Glazing Brush (Bluetop) | GLZ-34
GLZ-34_Size-02
Regular price $14.50/
Shipping calculated at checkout.
NEW! Blue POLYTOP BRUSH. The domed water glazer is the work horse of decorative painting. This is a modern replica of the classic bristle/nylon blend version.
- SOFT, Blue POLYTOP synthetic fiber
- Slightly domed shape for full coverage
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for 'breaking up the glaze'
- Large size can glaze an entire wall with speed
- Use only in water mediums
- Wash with Soap
SIZE TRANSLATIONS
| SIZE | BRUSH LENGTH | FERRULE WIDTH | HAIR LENGTH |
| 2 | .86" / 22mm | 2.5" / 64mm | |
| 4 | 1" / 26mm | 2.5" / 64mm | |
| 6 | 1.2" / 29mm | 2.8" / 72mm | |
| 8 | 1.3" / 33mm | 3.1" / 78mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE |
Blue Polytop Synthetic |
|
BRUSH HOLD |
Pencil Hold, Drummer's Hold |
|
USAGE |
Applying glaze & base coat, stippling, adding texture |
|
MEDIUM |
Water |
|
FERRULE |
Tin |
|
HANDLE |
Wooden round long |
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Original Domed Glazing Brush (Bristle, Nylon) | GLZ-01D
GLZ-01D_Size-02
Regular price $19.00/
Shipping calculated at checkout.
Our domed water glazer is the work horse of decorative painting. This is our highest level of quality. This is a modern replica of the classic full bristle version.
- Hand-shaped with select bristle fibers
- Premium stainless steel ferrule with hand-tied string
- Sealed handle for longevity
- Nylon synthetic fiber with 60% natural bristle
- Slightly domed shape for full coverage
- Rounded for ultimate medium dispersion (learn more)
- Brush 'springs' into action (learn more)
- Perfect for 'breaking up the glaze'
- Large size can glaze an entire wall with speed
- Application/Usage: applying glaze and basecoat; stippling; adding texture
- Preferred Medium: Water
- Brush Ferrule/Handle: Tin, wooden round long
- Brush Hold: Pencil Hold, Drummer's Hold
- Hair Length: 2-3" (60-72mm)
- Dia./width: .5-1.25" (25-32mm)
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Detail Basecoat Brush (Nylon, Bristle) | GLZ-17D
GLZ-17D_Size-30
Regular price $9.00/
Shipping calculated at checkout.
We've altered this traditional brush by using nylon fiber mixed with natural bristle to use with all of today's water mediums. These little brushes will prove to be very helpful with minor touch-ups, glazing, stippling, & strie.
- Description: Nylon/Bristle fiber for WATER medium
- Application/Usage: basecoat; glazing; stippling in water medium
- Preferred Medium: Water
- Brush Ferrule/Handle: tin, wooden round short
- Brush Hair Type: Natural Bristle/Nylon Blend
- Brush Hold: pencil hold, Drummer's Hold
- Brush Care: Water: Wash with soap
- Hair Length: 1.8" (45mm)
- Dia./width: 1.15, 1.5, 2, 2.5 inches
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
Precision Basecoat Brush (Nylon, Bristle) | GLZ-17
GLZ-17_Size-20
Regular price $4.50/
Shipping calculated at checkout.
Classic square shape for thicker mediums such as paint and loose texture. Our brushes are high-quality substitutes of paint store brands. This square, basecoater will prove to be very helpful in your brush kit.
- 1/2-3/4 inch thick, 60% bristle-nylon synthetic fiber with 40% natural bristle
- Works well for glazing and stippling
- Excellent for applying heavy textures (old world style)
- Much more efficient than a chip brush
-
We've altered this traditional brush by using nylon fiber mixed with natural bristle to use with all of today's water mediums
-
These little brushes will prove to be very helpful with minor touch-ups, glazing, stippling, & strie.
- Brush Care: Water: Wash with soap
SIZE TRANSLATIONS
|
SIZE |
BRUSH LENGTH |
FERRULE WIDTH |
FERRULE LENGTH |
HAIR LENGTH |
|
20 |
0.3"/9mm | 0.7"/20mm |
1.7"/44mm |
|
|
40 |
0.5"14mm | 1.5"/40mm | 2.1"/55mm | |
|
60 |
0.6"/17mm | 2.3"/60mm |
2.4"/61mm |
BRUSH SPECIFICATIONS
|
HAIR TYPE
|
Natural Bristle/Nylon Blend
|
|
BRUSH HOLD
|
Pencil hold, Drummer's Hold
|
|
USAGE
|
Basecoat; glazing; stippling in water medium
|
|
MEDIUM
|
Water
|
|
FERRULE
|
Tin
|
|
HANDLE
|
Wooden round short
|
How-To Brush Care Guide
Prepare your brushes for their first use - read below.
Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.
Thick hair: examples are; badger, hog (china bristle), horse hair
Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)
Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle
To minimize brush shedding, you should:
- Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
- Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
- Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)
Repeat this process a few more times.
All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.
Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.
Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.
Proper cleaning procedure
for oil/water and large or small brushes:
| Oil Medium | Water Medium | |
|---|---|---|
| Large Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. | Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry. |
| Small Brushes | Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. | Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic. |
