Name: Economy Pointed Brush (Ruby Nylon) | TL-21D
Brand: Faux Brushes
SKU: TL-21D_Size-12
Price: 2.98 USD
Availability: InStock

Economy Pointed Brush (Ruby Nylon) | TL-21D

TL-21D_Size-12

$4.25 $2.98 Save $1.27

Shipping calculated at checkout.

Our most cost-effective series. Any decorative painter or muralist shouldn't be caught without a bunch of these handy economical brushes. The resilient RUBY synthetic fiber will last beyond the typical overuse time.

Brush Care: wash with soap
Hair Length: .3 to .8 in / 8 to 20 mm
Dia./width: .06 to .17 in / 2 to 5 mm

BRUSH SPECIFICATIONS

HAIR TYPE	Nylon/synthetic blend
BRUSH HOLD	Pencil Hold
USAGE	Murals; portraiture; trompe l'oeil
MEDIUM	Water
FERRULE	Tin
HANDLE	Wooden round short

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Golden Artist Colors SoFlat Matte Acrylic Paint

Golden Artist Colors SoFlat Matte Acrylic Paint

PSF-01_PY_4oz

$16.39

Shipping calculated at checkout.

GOLDEN has developed a paint that helps artists create immersive fields of color without the distraction of texture and glare. The paint has a flowing consistency, offering exceptional coverage and a leveling capability as it dries. This unique combination of qualities can only be found in SoFlat Matte Acrylic Colors.

Artists have used gouache for centuries because of its matteness and opacity, but are restricted by its inherently sensitive paint film. SoFlat moves beyond these limitations, providing a velvety smooth, durable surface. The advantages of SoFlat are extended by its compatibility with other acrylic paints and mediums, increasing the range of creative effects that can be achieved.

Perhaps the most important quality of SoFlat is quality itself. Because it is produced using the same professional standards as all GOLDEN Acrylics, and is backed by our unrivaled service and support, you can depend on the performance and consistency of these professional artist colors.

OPACITY AND COVERAGE
When striving for that pure color effect, you need a paint that goes down evenly with full intensity in as few coats as possible. While some pigments are naturally transparent, SoFlat has a unique formulation that provides greater opacity from these colors than is normally found in acrylic paints.

LEVELING
Perhaps the most distinctive quality, and the one that might be most unique to SoFlat, is the paints natural leveling quality. The paint relaxes after being brushed out, making it easier to minimize the appearance of brushstrokes for uninterrupted fields of rich matte color.

MATTE
Artists have always been drawn to the enigmatic quality of matte color, and SoFlat delivers with a glare-free surface that allows the depth and intensity of each color take center stage.

Click for SDS sheet

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Spalter Brush - Short (Bluetop) | GLZ-29

Spalter Brush - Short (Bluetop) | GLZ-29

GLZ-29_Size-040

$10.00

Shipping calculated at checkout.

Unique blue, silky fiber in our traditional spalter (mottler) shape and SHORTER length (38mm = 1.5"). This brush is primarily used to aid application of varnishes, thinned latex paints, and acrylic glazes. Unlike the "chip" brush that can be found in standard hardware stores, our spalter brush has a thick row of densely packed hair for ultimate performance and control.

Uses: strie, moiré in woodgraining, and general tipping and smoothing to soften brushmarks
Tips are manufactured to flower to hold more paint which will allow the brush to cut sharp edges.
Best used in water based medium
Tin ferrule with wooden flat handle
Smaller sizes are great for window and door casing. Larger sizes for entire walls.
Brush hold: Drummer's hold; quack motion
Soft, silky hair allows for delicate tipping for minimum brush marks.

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
40	7.6" / 19.2cm	.4" / 9mm	1.6" / 40mm	1.5" / 38mm
60	7.6" / 19.2cm	.4" / 9mm	2.3" / 60mm	1.5" / 38mm
80	8.1" / 20.6cm	.4" / 9mm	3.1" / 80mm	1.5" / 38mm
100	9.4" / 24cm	.4" / 9mm	4" / 100mm	1.5" / 38mm
150	8.5" / 21.5cm	.4" / 9mm	6" / 150mm	1.5" / 38mm
200	9.4" / 24cm	.4" / 9mm	8" / 200mm	1.5" / 38mm

BRUSH SPECIFICATIONS

HAIR TYPE	Bluetop synthetic
USAGE	Strie; moire; softening paint; varnish

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Chubby Stencil Brush (Nylon,Bristle) | STEN-03

Chubby Stencil Brush (Nylon,Bristle) | STEN-03

STEN-03_Size-10

$8.00

Shipping calculated at checkout.

This is not just your average stencil brush. This nylon/synthetic blend will hold up to heavy pouncing and all of today's water mediums. For your biggest stenciling jobs, don't be caught without this efficient brush. Easily cleaned, these brushes should last longer than most. The resilient nylon blend helps keep the original shape and thick cluster of razor cut fiber. Available in 2 sizes

Nylon synthetic fiber with 50% natural bristle
Brush 'springs' into action (learn more)
Hair can be tied or taped for an even tighter print
Brush Care: Wash with soap
Hair Length: 1.6 in / 40 mm
Dia./width: 1.4 in / 33 mm

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
14	4.4" / 11.3cm	" / mm	" / mm	" / mm
16	5.1" / 13cm	" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle/ Nylon blend
BRUSH HOLD	Pencil Hold, Conductor's Hold
USAGE	Stenciling
MEDIUM	Water
FERRULE	Copper
HANDLE	Wooden round stubby short

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Multi-Tip Pencil Veiner (Samina Nylon) | MB-11

Multi-Tip Pencil Veiner (Samina Nylon) | MB-11

MB-11_Size-2

$28.89

Shipping calculated at checkout.

This synthetic fiber, multi-tip flat brush creates veins and grains for faux marble and woodgrain techniques. The number of brush tips ranges from 2-5 brushes in one. Using a positive application, the brush tips will come to a fine point for delicate and parallel lines.

Available in 2,3, or 5 tips.
Faux marble: Sea Green, Yellow Flower, Imperador marble, etc.
Woodgraining: walnut, mahogany, teak, pine, etc
For our stiffer, natural bristle version, see 3-Tip Pencil Veiner
Best used in water medium
Brush hold: Drummer's hold, Conductor's hold
Tin ferrule with wooden, flat handle
Brush Care: Wash with Soap

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
3		.3" / 8mm	.3" / 8mm	1.8"/47mm

BRUSH SPECIFICATIONS

HAIR TYPE	Synthetic Samina fiber
USAGE	positive application, woodgraining; faux marble veining

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Trompe L'Oeil Kit | BKIT-05

BKIT-05

$266.25 $239.63 Save $26.62

Shipping calculated at checkout.

Tackle any trompe l'oeil or ornamentation project with confidence with this kit. From linear faux molding to intricate scrolls and details, this complete kit will provide the right tools for the job. These are the brushes you've seen Pierre use in his informative demo's or classes. Get started today with this extensive kit.

This kit contains 15 brushes (plus a striping edge).

Save 10% discount on all kits and sets.

Kit includes:

TL-02 Long Liner Brush (Sable) size 6
TL-03 Lettering Brush (Samina Nylon) size 10
TL-05 Pointed Ornament Brush (Sable) size 8, 10
TL-07 Flat Ornament Brush (Sable, Toray Nylon) size 8
TL-09 Filbert Striping Brush (Bordeaux Nylon) size 4, 8, 14
TL-10 Long Filbert Striping Brush (Bordeaux Nylon) size 8
TL-11 Slanted Striping Brush (Sable) size 6 & 8
TL-12 Sharp Filbert Striping Brush (Sable) size 8 & 12
TL-14 Rondin Liner Striper Brush (Squirrel) size 8
TL-16 Acryl'Art Filbert Brush (Bordeaux Nylon) size 8
TL-30 Striping Edge 36"

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Acryl'art Detail Pointed Brush (Bordeaux Nylon) | TL-18D

TL-18D_Size-02

$6.40 $4.48 Save $1.92

Shipping calculated at checkout.

For all you fresco mural painters, these brushes are for you! These synthetic brushes are made with a slightly stiffer, cognac fiber for all water mediums. Muralist will love these brushes for their resiliance, strength, and slightly heavier handle. Our new Acryl'art synthetics are no substitute for sable, but the perfect starter brush. Available in 3 sizes.

Brush Care: Wash with soap

Hair Length: .6 in to 1.75 in

Dia./width: .4 in to 1.5 in

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
2		" / mm	" / mm	" / mm
4		" / mm	" / mm	" / mm
6		" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Bordeaux Nylon
BRUSH HOLD	Conductor's Hold, Pencil Hold
USAGE	Trompe l'oeil, striping
MEDIUM	Oil or Water
FERRULE	Tin
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Tooth Spalter Brush - Regular (Bluetop) | GLZ-26

Tooth Spalter Brush - Regular (Bluetop) | GLZ-26

GLZ-26_Size-040

$10.50

Shipping calculated at checkout.

A blue, silky fiber tooth spalter has "teeth" cut out of a traditional spalter. These spaces allow for the brush to be used for different applications. This model mimics our traditional spalter shape and standard length (45mm = 1.75"). This brush is typically used to manipulate painting mediums such as glaze and paint by displacing medium. It can also be dipped into medium to create a print. The tooth spalter creates clear, strie lines with a series of parallel lines.

Uses: Strie, general glazing, dry-brushing, straight graining (side grains) in woodgraining, use with thick paint or textures.
Teeth are machine cut but meant to be randomly spaced. Generally, the teeth gaps are 3-4mm (.15") wide.
Smaller sizes are great for window and door casing. Larger sizes for entire walls.
Our blue brushes are styled with a white tip. These ends are manufactured to flower to hold more paint which will allow the brush to cut sharp edges.
Brush hold: Drummer hold
Best used in water mediums
Tin ferrule with a short, flat handle
General Brush Specifications: Thickness of brush = 9mm (.4"), Average Length of hair = 45mm (1.75")

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
40	7.8" / 19.7cm	.4" / 9mm	1.6" / 40mm	1.8" / 45mm
60	7.8" / 19.7cm	.4" / 9mm	2.3" / 60mm	1.8" / 45mm
80	7.8" / 19.7cm	.4" / 9mm	3.1" / 80mm	1.8" / 45mm
100	8.9" / 22.5cm	.4" / 9mm	4" / 100mm	1.8" / 45mm
150	9.1" / 23.1cm	.4" / 9mm	6" / 150mm	1.8" / 45mm
200	9.6" / 24.5cm	.4" / 9mm	8" / 200mm	1.8" / 45mm

BRUSH SPECIFICATIONS

HAIR TYPE	Bluetop synthetic fiber
USAGE	Strie, dry-brushing, straight graining in woodgraining, use with thick paint or textures.

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Spalter Brush - Long (Bluetop) | GLZ-37

GLZ-37_Size-40

$10.75

Shipping calculated at checkout.

Unique blue, silky fiber in our traditional spalter (mottler) shape and LONGER length (average of 65mm long). This brush is primarily used to aid application of varnishes, thinned latex paints, and acrylic glazes. Unlike the "chip" brush that can be found in standard hardware stores, our spalter brush has a thick row of densely packed hair for ultimate performance and control.

Uses: strie, moiré in woodgraining, and general tipping and smoothing to soften brushmarks
Tips are manufactured to flower to hold more paint which will allow the brush to cut sharp edges.
Best used in water based medium
Tin ferrule with wooden flat handle
Smaller sizes are great for window and door casing. Larger sizes for entire walls.
Brush hold: Drummer's hold; quack motion
Soft, silky hair allows for delicate tipping for minimum brush marks.

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
40	8" / 20.4cm	.4" / 9mm	1.6" / 40mm	2.6" / 65mm
60	8.5" / 21.6cm	.4" / 9mm	2.3" / 60mm	2.6" / 65mm
80	8.5" / 21.6cm	.4" / 9mm	3.1" / 80mm	2.6" / 65mm
100	9.1" / 23cm	.4" / 9mm	4" / 100mm	2.6" / 65mm
150	9.3" / 23.5cm	.4" / 9mm	6" / 150mm	2.6" / 65mm
200	10.2" / 25.8cm	.4" / 9mm	8" / 200mm	2.6" / 65mm

BRUSH SPECIFICATIONS

HAIR TYPE	Bluetop synthetic
USAGE	Strie; moire; softening paint; varnish

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Filbert Ornament Brush (Sable, Toray Nylon) | TL-08D

TL-08D_Size-08

$14.45 $10.12 Save $4.33

Shipping calculated at checkout.

In order to make a more economical brush, we've combined some natural sable hair with synthetic fiber which holds up to today's water mediums. The filbert tip, sable blend brush is used primarily for half tone shadowing where a sharp, unfaded stroke is desired. Use effectively with a Striping Edge for faux molding & other linear projects. Muralists will surely love this series of sable/mix for production and accuracy. Available in 4 sizes.

sable /synthetic blend
Flat shape is best for half tone shadows
Perfect for landscape and figure murals
Larger sizes great for quick blending, fading, and wide half tone
Description: Economical mix of sable with synthetic
Brush Care: Wash with soap
Hair Length: 8 mm to 12 mm
Dia./width: 6 mm to 14 mm

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
6		" / mm	" / mm	" / mm
8		" / mm	" / mm	" / mm
10		" / mm	" / mm	" / mm
14

BRUSH SPECIFICATIONS

HAIR TYPE	Kolinsky Sable Mix
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Trompe l'oeil; striping; half toneTL-8
MEDIUM	Water
FERRULE	Tin
HANDLE	Wooden round medium

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Original Domed Glazing Brush (Bristle, Nylon)

Original Domed Glazing Brush (Bristle, Nylon) | GLZ-01D

Original Domed Glazing Brush (Bristle, Nylon) | GLZ-01D

GLZ-01D_Size-04

$23.50 $16.45 Save $7.05

Shipping calculated at checkout.

Our domed water glazer is the work horse of decorative painting. This is our highest level of quality. This is a modern replica of the classic full bristle version.

Hand-shaped with select bristle fibers
Premium stainless steel ferrule with hand-tied string
Sealed handle for longevity
Nylon synthetic fiber with 60% natural bristle
Slightly domed shape for full coverage
Rounded for ultimate medium dispersion (learn more)
Brush 'springs' into action (learn more)
Perfect for 'breaking up the glaze'
Large size can glaze an entire wall with speed
Application/Usage: applying glaze and basecoat; stippling; adding texture
Preferred Medium: Water
Brush Ferrule/Handle: Tin, wooden round long
Brush Hold: Pencil Hold, Drummer's Hold
Hair Length: 2-3" (60-72mm)
Dia./width: .5-1.25" (25-32mm)

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Pointed Detail Brush (Samina Nylon) | TL-27

Pointed Detail Brush (Samina Nylon) | TL-27

TL-27_Size-08

$12.85

Shipping calculated at checkout.

An old-style brush in our most popular, Samina fiber. Use this adaptation of the classic pointed brush for trompe lÃªoeil, ornamentation, foliage, portraiture, faux marble veining, and preparatory sketches. Available in 4 sizes

Description: Soft synthetic, tapered point

Brush Care: wash with soap

Hair Length: .6 - .85 inch

Dia./width: .15 - .25 inches

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
8	11.9" / 30.1cm	" / mm	" / mm	" / mm
10	12.2" / 30.9cm	" / mm	" / mm	" / mm
12	11.4" / 29cm	" / mm	" / mm	" / mm
14	11.6" / 29.5cm	" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Samina synthetic
BRUSH HOLD	Pencil Hold
USAGE	Ornamentation, veining for faux marble, murals
MEDIUM	Water
FERRULE	Tin
HANDLE	Wooden

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Slanted Striping Brush (Sable) | TL-11

TL-11_Size-06

$19.25

Shipping calculated at checkout.

A pure sable brush pays for itself on the first job! Our primary brush for the thinnest, straightest lines desired in striping. Used on its side, every tip of the hand-selected sable hair should be in contact for the longest, and most consistent stripe. Truly, the slanted, sable striping brush will prove to be invaluable when used effectively with a Striping Edge for faux molding & other linear projects. Available in 5 sizes.

High-quality Kolinsky sable hair
Sable hair ages well and is self-sharpening
Long handle for use with Striping Edge
Slanted shape is best for straight, thin lines
Can be used in oil or water when dedicated (learn more)
Great for 'dirt marks' in corners and recessed molding
Great for opaque stripes and painted grout lines
Sable hair for striping
Brush Care: Water: Wash with soap, Oil: Thinned & lard

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
6	12.3" / 31.2cm
8	12.3" / 32.2cm
10	12.4" / 31.5cm
12	12.5" / 31.7cm
14	12.8" / 32.5cm

BRUSH SPECIFICATIONS

HAIR TYPE	Sable Hair
BRUSH HOLD	Conductor's Hold
USAGE	Trompe l'oeil; striping; opaque accents
MEDIUM	Water or Oil
FERRULE	Tin
HANDLE	Wooden round long

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Pointed Fine Detail Brush (Sable) | TL-04

Pointed Fine Detail Brush (Sable) | TL-04

TL-04_Size-02

$13.90

Shipping calculated at checkout.

My best brush for all freehand detail work! Quality, short pointed sable hair is hand-selected for this detail brush. It's amazingly pointed to make it easy to render magic for all freehand detail painting. For any mural or ornamentation project, use our short, pointed, sable detail brush for accuracy and best response. Using your pinkie as a guide, create controlled, 'thin-thick-thin' strokes, evenly with this brush. Available in 3 sizes

Fine pointed sable hair
Sable hair ages well and is self-sharpening
Short handle for control
Rounded for ultimate medium dispersion (learn more)
Can be used in oil/water when dedicated (learn more)
Excellent for surgical touch-ups
Description: Soft hair, for precision painting
Preferred Medium: Oil/Water
Brush Ferrule/Handle: tin, wooden round short
Brush Hair Type: Sable
Brush Hold: Conductor's Hold, Pencil Hold
Brush Care: Water: Wash with soap, Oil: Thinned & lard
Hair Length: .6 to .8" (15-20mm)
Dia./width: .12" (3mm)

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
2	7.2" / 18.2cm	" / mm	" / mm	" / mm
4	8" / 20.3cm	" / mm	" / mm	" / mm
6	8.1" / 20.5cm	" / mm	" / mm	" / mm

BRUSH SPECIFICATIONS

HAIR TYPE	Kolinsky Sable
BRUSH HOLD	Conductor's Hold, Pencil Hold
USAGE	Freehand trompe l'oeil & ornamentation
MEDIUM	Oil or Water
FERRULE	Tin
HANDLE	Wooden round short

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Original Pointed Glazing Brush (Bristle)

Original Pointed Glazing Brush (Bristle) | GLZ-04D

Original Pointed Glazing Brush (Bristle) | GLZ-04D

GLZ-04D_Size-04

$26.75 $18.73 Save $8.02

Shipping calculated at checkout.

Our pointed bristle glazer will surely assist in your glazing with its excellent line cutting capabilities. It as a 'sash', this sturdy brush can 'cut' a perfect line, work in tight corners, & accurately glaze your woodgraining or faux marble projects.

High quality bristle keeps it's shape
Pointed shape allows for precise application
Rounded for ultimate medium dispersion (learn more)
Can be used in oil/water when dedicated (learn more)
Perfect for glazing stiles/rails, baseboard, and dentil molding
Larger sizes best for glazing panels for woodgraining

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle
BRUSH HOLD	Pencil Hold, Drummer's Hold
USAGE	Precisely applying glaze and basecoat; woodgraining; faux marble
MEDIUM	Oil or Water
FERRULE	Copper
HANDLE	Wooden round long

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
4		" / mm	" / mm	" / mm
8		" / mm	" / mm	" / mm

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Oval Varnish Brush (Bluetop) | GLZ-25

GLZ-25_Size-040

$25.70

Shipping calculated at checkout.

This classic Italian-inspired oval brush has a thick hair density wrapped in an oval-shaped ferrule. This shape is a great mix between flat and round brushes. Used to apply water based vanishes and basecoat paints. Silky, blue hair allows for glass-like application of mediums. Our blue brushes are styled with a white tip. These ends are manufactured to flower to hold more paint which will allow the brush to cut sharp edges

Oval shape great mix between flat and round brushes
Small sizes great for painting stiles/rails, small panels, mullions, etc.
Brush hold: Drummer's Hold, Pencil Hold
Metal ferrule with plastic handle
Best for water based mediums
Proper brush care - Wash thoroughly with soap, shape or hang to dry

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
40	8.7" / 22cm	0.3"/ 9mm	1.5"/ 40mm	1.8" / 45mm
50	9.1" / 23.2cm	0.3"/ 9mm	1.9"/ 50mm	1.8" / 45mm
60	9.4" / 24cm	0.3" 9mm	2.3" / 60mm	1.8" / 45mm

BRUSH SPECIFICATIONS

HAIR TYPE	Bluetop synthetic fiber
USAGE	Application of varnish, paint, glaze medium

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Long Filbert Striping Brush (Samina Nylon) | TL-29

Long Filbert Striping Brush (Samina Nylon) | TL-29

TL-29_Size-02

$13.60

Shipping calculated at checkout.

This brush will give a long, delicate stroke for striping. Use also to create thin veins in faux marble techniques. Long hair holds plenty of paint medium. Perfect for the thin-thick-thin marks like of real marble veins. Can also be used in woodgrain techniques.

Flat shape and domed tip
Samina synthetic fiber is softer than bordeaux version
see also MB-19, TL-10
Use effectively with a Striping Edge for faux molding & other linear projects
Best used in water medium
Brush hold: Conductor's hold
Tin ferrule with long wooden handle
Brush Care: Wash with soap
Hair Length: 1.25 inches
Dia./width: .25 - .35 inches

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
2	12.4" / 31.4cm	" / mm	" / mm	" / mm
4	12.6" / 32cm	" / mm	" / mm	" / mm
6	12.6" / 32cm	" / mm	" / mm	" / mm
10	12.5" / 31.8cm

BRUSH SPECIFICATIONS

HAIR TYPE	Samina synthetic fiber
USAGE	transparent striping; faux marble veining

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Water Marble Kit | BKIT-04

BKIT-04

$537.00 $483.30 Save $53.70

Shipping calculated at checkout.

This is our most popular marble kit because of it's balance and variety of specialty brushes. A must have for the serious marbelizer. While using today's thicker water mediums, have what you need to complete all of the most demanded faux marble. From White Carrera and Yellow Sienna, to Seagreen and Rouge Royal, be prepared to conquer any project. These are the brushes you've seen Pierre use in his informative demo's or classes. Get started today with this extensive kit.

This kit contains 15 brushes.

Save 10% discount on all kits and sets.

Kit includes:

MB-01 Wire-Tied Veining Brush (Bordeaux Nylon) size 4 & 6
MB-02 Wire Tied Veining Brush (Bristle) size 4
MB-03 Wire-Tied Veining Brush (Samina Nylon) size 8
MB-05 Two-Header Pointed Brecher Brush (Samina Nylon) size 0
MB-09 Chiqueteur size 8
MB-10 Round Badger Softener size 14
MB-11 3-Tip Pencil Veiner (Samina Nylon)
MB-12 Mini Flat Spalter Brush size 20
MB-13 Tooth Onyx Brush
MB-14 Long Brecher Brush (Samina Nylon) size 00
GLZ-41 PRO Pointed Glazing Brush (Bristle, Nylon) size 000, 8
GLZ-16 Spattering Brush
TL-10 Long Filbert Striping Brush (Bordeaux Nylon) size 6

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

Detailing Flat Paint Brush (Bluetop) | GLZ-27

Detailing Flat Paint Brush (Bluetop) | GLZ-27

GLZ-27_Size-020

$5.85

Shipping calculated at checkout.

Standard flat brush shape with densely packed silky, blue synthetic fiber. Our blue brushes are styled with a white tip. These ends are manufactured to flower to hold more paint which will allow the brush to cut sharp edges and glass-like application of mediums. Small sizes great for painting stiles/rails, small panels, mullions, etc.

Uses: to apply varnishes and paint
Works well for glazing and stippling
Best used with water based mediums
Brush hold: Pen hold
Tin ferrule with plastic handle
Proper brush care - Wash thoroughly with soap, shape or hang to dry

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	FERRULE LENGTH	HAIR LENGTH
20	7.6" / 19.2cm	0.5" / 14mm	0.7" / 20mm	1.8" / 47mm
30	8" / 20.4cm	0.5" / 14mm	1.1" / 30mm	1.8" / 47mm
40	8.5" / 21.6cm	0.5" / 14mm	1.5" / 40mm	2.2" / 56mm
60	9.3" / 23.3cm	0.5" / 14mm	2.3" / 60mm	2.4" / 61mm
70	9.4" / 23.8cm	0.6" / 16mm	2.7" / 70mm	2.4" / 61mm
80	9.7" / 24.8cm	0.6" / 16mm	3.1" / 80mm	2.4" / 61mm

BRUSH SPECIFICATIONS

HAIR TYPE	Bluetop synthetic fiber
USAGE	application of glazing medium, varnish paint

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

PRO Domed Glazing Brush (Bristle, Nylon) | GLZ-31

PRO Domed Glazing Brush (Bristle, Nylon) | GLZ-31

GLZ-31_Size-02

$15.50

Shipping calculated at checkout.

Our PRO SERIES DOMED glazing (sash) brushes have a classic round shape for ultimate paint medium dispersion. It is used to apply glaze, paint, wax, and thin textures. Use like a standard paint brush or scrubbing motion.

PRO SERIES: Premier quality hairs, varnished wood handle, competitively priced
See other levels: ULTIMATE and ECONOMY SERIES
and our BLUETOP PRO and BLUETOP ECONOMY SERIES.
The DOMED shape is best for maximum coverage of surfaces. See also pointed glazing brush.
Rounded for ultimate medium dispersion (learn more)
Brush hold: Pencil Hold, Drummer's Hold
Tin ferrule with varnished long wooden handle
Brush care: Wash thoroughly with soap, shape or hang to dry

SIZE TRANSLATIONS

SIZE	BRUSH LENGTH	FERRULE WIDTH	HAIR LENGTH	FERRULE LENGTH
2	11.8" / 30cm	.9" / 23mm	2.3" / 59mm	0.9"/25mm
4	12.2" / 31.1cm	1" / 27mm	2.9" / 69mm	1"/26mm
6	13.2" / 33.5cm	1.2" / 32mm	3.1" / 79mm	1.2"/32mm
8	13.2" / 33.6cm	1.3" / 34mm	3.1" / 79mm	1.3"/34mm

BRUSH SPECIFICATIONS

HAIR TYPE	Natural Bristle / Nylon blend
USAGE	Application of varnish, paint, glaze medium; stippling

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle

To minimize brush shedding, you should:

Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.

Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.

Proper cleaning procedure

for oil/water and large or small brushes:

	Oil Medium	Water Medium
Large Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down.	Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes	Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits.	Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.