Gilding Sizing Brush (Ox Ear) | GD-07
Gilding Sizing Brush (Ox Ear) | GD-07

Gilding Sizing Brush (Ox Ear) | GD-07

ITEM#:

GD-07_Size-040

PRICE:

Sale price$50.40
/
Shipping calculated at checkout.

Size

How-To Brush Care Guide

Prepare your brushes for their first use - read below.

Most of our large and fine hair brushes are hand-set and made with different hairs that are tapped in a small copper cylinder before being glued into the ferrule. This is why some of the hairs are not properly affixed to the ferrule, so the brush will shed some hair the first few times you will use it.

Thick hair: examples are; badger, hog (china bristle), horse hair

Fine hair: examples are sable; squirrel, goat, skunk (fine, thin short hair)

Synthetic Fiber: examples are; taklon, samina, bordeaux, synthetic bristle


To minimize brush shedding, you should:

  1. Wash the brush thoroughly with a mild dish soap in warm water and massage the hair to comb out the loose bristles. Rinse until there is no soap residue left in the brush.
  2. Ring the brush out by rolling it between your hands as if you were trying to make a fire with a stick to fluff out the brush.
  3. Let dry by hanging the brushes or lay it down at the edge of a table (a hog bristle will have a strong odor due to the bone glue used to attach the bristles. This will go away after a few washings.)

Repeat this process a few more times.

All acrylic glazes contain some sort of ammonia which attacks the structure of the natural hair. Therefore, brush maintenance and thorough repetitive cleaning as described in step 1, 2, & 3 is imperative to protect and extend the life of your brush.

Applying a few drops of ‘leave in’ conditioner is also a good idea if you’re not going to be using your brush for some time.


Dried Paint: If some acrylic glaze becomes hardened on the brush, start by removing the heaviest part with denatured alcohol then rinse with water and coat the hairs with Murphy’s Oil Soap and leave for several hours. Apply the steps again from 1, 2, & 3 so the paint will brush out easily and leave your brush as good as new. Be careful as soap left too long in the natural hair will deteriorate the flexibility of the hair.


Proper cleaning procedure

for oil/water and large or small brushes:

  Oil Medium Water Medium
Large Brushes Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Wash brush with warm water and a lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry upside down. Rinse thoroughly with warm water. Clean with a tiny bit of lathering soap and rinse until completely clean. Shake out excess water, quickly form brush shape, and then allow to dry.
Small Brushes Prep brushes by thinning in two or more baths of spirits or until a rag runs free of paint. Apply a generous portion of Lard to the tip of the brush and store. To reuse brush, completely thin with spirits. Clean each small brush very carefully and gently with a tiny bit of lathering soap. Shake out excess water, quickly form brush shape, and then allow to dry . To reshape a brush, dip it in Gum Arabic.

The five decorative painting brush holds you'll need for Pierre's full line of brushes and tools.

 

 

Pencil Hold: 

At the ferrule, like a pencil

Pencil Hold

Conductor's Hold: 

At the tip of the handle, like a conductor's baton

conductor hold

Drummer's Hold: 

Grasping the entire handle, like a drummer's stick

drummer hold

Baseball Hold: 

With an open grip, as if holding a baseball

baseball hold

Quack Hold: 

Between the thumb and the fingers (positioned to mimic a quacking duck) either on the ferrule or the hairs.

quack hold

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Made with Brown Ox ear hair. The water gilding gesso brush is used to apply water size. The brush is densly packed with goat hair and wrapped with a copper ferrule. The hair retains a heavy amount of material making it ideal for large applications.

  • Description: Densly packed goat hair, flat tip, for applying size
  • Brush Care: wash with mild soap

See Also:

SIZE TRANSLATIONS

SIZE BRUSH LENGTH FERRULE WIDTH FERRULE LENGTH

HAIR LENGTH

40 9.8" / 24.8cm
0.4" / 11mm
1" / 26mm

0.9" / 23mm

50 10" / 25.3cm 1" / 25mm 1.5" / 37mm

1" / 25mm

60 10.2" / 25.8cm 0.4" / 11mm
1.8" / 46mm
1.1" / 27mm


BRUSH SPECIFICATIONS

 HAIR TYPE

Natural skunk

BRUSH HOLD

Pen hold

USAGE

For sizing in water gilding or tonal layering

MEDIUM

Water

FERRULE

Copper 

HANDLE

Wooden 


Recently viewed